"Hardrace" suspension parts ?
Doesnt see what you did
Thread Starter
Join Date: Sep 2007
Posts: 3,683
Likes: 0
Received 0 Likes
on
0 Posts
"Hardrace" suspension parts ?
Anyone used this brand ? Are they worth a crap, decent ?
HARDRACE - Performance Suspension Parts
Liking their tension rods, was considering Cusco's, but they are overpriced, especially compared to TEIN, but I like the sealed up ends on the cuscos, and these hardrace ones seem to be sealed up well.
HARDRACE - Performance Suspension Parts
Liking their tension rods, was considering Cusco's, but they are overpriced, especially compared to TEIN, but I like the sealed up ends on the cuscos, and these hardrace ones seem to be sealed up well.
__________________
R.I.P. Tim
SR, RB, and LS1 into S13/14 harnesses converted.
SR 13/13- $120, 13/14 or 14/13 $180
RB $200
LS1 $250
full on track cars can take a lot more liberties with shit than a street car. bell bottom kits and crazy wheel fitment look cool sliding on a track, but when i want to drive to taco bus, im going to ruin all of that shit. so it just doesnt work for me. function over fashion.
Originally Posted by osama tim laden
also, im about to blow my moderator status by deleteing all of davids posts
SR, RB, and LS1 into S13/14 harnesses converted.
SR 13/13- $120, 13/14 or 14/13 $180
RB $200
LS1 $250
its chinaboop stuff. but those guys are getting a lot better at duplicating things... quality is certainly getting better with each new knock off that comes out.
__________________
Originally Posted by osama tim laden
This things too low... raise it off the towhooks.
(O=O/-ROUGH WORLD-\O=O)
This guy sells a lot of their stuff... and has been selling it for awhile.
eBay Store - delubozparts: Engine Parts Pulleys Shifters, Exhausts Headers Manifolds DP, Intake Systems Air Filters
eBay Store - delubozparts: Engine Parts Pulleys Shifters, Exhausts Headers Manifolds DP, Intake Systems Air Filters
__________________
Originally Posted by osama tim laden
This things too low... raise it off the towhooks.
(O=O/-ROUGH WORLD-\O=O)
the toe and traction rods are a weak and dated design, the rest doesn't look any better.
go to SPLParts.com, battle version, etc... or buy it again later.
Just don't cheap out on outter tie-rod ends, you're fucked when one breaks
these were Tein outters... head on into this.
and these are my old Tein outters
meanwhile my SPL outters survived sideways into the wall at Desoto at full opposite lock and bent my front lower control arm out of their way, i re-aligned the front and drove home.
http://www.youtube.com/watch?v=GGUHYlNTswM
go to SPLParts.com, battle version, etc... or buy it again later.
Just don't cheap out on outter tie-rod ends, you're fucked when one breaks
these were Tein outters... head on into this.
and these are my old Tein outters
meanwhile my SPL outters survived sideways into the wall at Desoto at full opposite lock and bent my front lower control arm out of their way, i re-aligned the front and drove home.
http://www.youtube.com/watch?v=GGUHYlNTswM
Last edited by jtmroczk; 03-20-2009 at 04:39 PM.
Doesnt see what you did
Thread Starter
Join Date: Sep 2007
Posts: 3,683
Likes: 0
Received 0 Likes
on
0 Posts
I just wanted to know if they were china crap or not, wasnt really looking for cheap price, so much as something that was sealed up well like the cuscos, at a price closer to Teins. So the Battle Version stuff is pretty good ? I suppose I could just get those and some heim seals to add on.
__________________
R.I.P. Tim
SR, RB, and LS1 into S13/14 harnesses converted.
SR 13/13- $120, 13/14 or 14/13 $180
RB $200
LS1 $250
full on track cars can take a lot more liberties with shit than a street car. bell bottom kits and crazy wheel fitment look cool sliding on a track, but when i want to drive to taco bus, im going to ruin all of that shit. so it just doesnt work for me. function over fashion.
Originally Posted by osama tim laden
also, im about to blow my moderator status by deleteing all of davids posts
SR, RB, and LS1 into S13/14 harnesses converted.
SR 13/13- $120, 13/14 or 14/13 $180
RB $200
LS1 $250
Doesnt see what you did
Thread Starter
Join Date: Sep 2007
Posts: 3,683
Likes: 0
Received 0 Likes
on
0 Posts
JTM, ty for the spl suggestion. QA1 rod ends, and seals for $199, SPL it is !
__________________
R.I.P. Tim
SR, RB, and LS1 into S13/14 harnesses converted.
SR 13/13- $120, 13/14 or 14/13 $180
RB $200
LS1 $250
full on track cars can take a lot more liberties with shit than a street car. bell bottom kits and crazy wheel fitment look cool sliding on a track, but when i want to drive to taco bus, im going to ruin all of that shit. so it just doesnt work for me. function over fashion.
Originally Posted by osama tim laden
also, im about to blow my moderator status by deleteing all of davids posts
SR, RB, and LS1 into S13/14 harnesses converted.
SR 13/13- $120, 13/14 or 14/13 $180
RB $200
LS1 $250
good call, they stand behind their stuff and offer a discounted upgrade program...
Agreed. Great parts at a good price!
__________________
Looking to buy or sell Real Estate, give me a call.
http://liberty-vip.com Flush ≠ VIP. Spread the word in 2012
Looking to buy or sell Real Estate, give me a call.
http://liberty-vip.com Flush ≠ VIP. Spread the word in 2012
Yep, I just orderd some more stuff from them yesterday. I would think with all the stuff I've bought from them I would get a sticker by now