Measure the length of the d/s to be sure. You might be able to find the length of each in the FSM.

 

ill do that once i get home

 

ok so the D/S i have measures in at about 47.5 inchs...

i searched the FSM and couldnt find length or specs on different drive shafts...

 

Found some more informations

**First # (front section) + second # (rear section) = total length (inches).
M/T with ABS 17.37 + 25.04 = 42.41
M/T w/out ABS 17.37 + 25.59 = 42.96
A/T with ABS 16.57 + 25.04 = 41.61
A/T w/out ABS 16.57 + 25.59 = 42.16

Which means If i have a non abs 5 speed driveshaft, i can take the short section from the 5 speed shaft and just attch it to the long section of the auto D/s and make it work


unless im mistaken?

 

wow sounds risky

 

not risky as all i dont think, its four bolts holding them together, just gotta swap them out.