Nissan/Infiniti Tech SR20DET? RB26DETT? VQ35DE? What's it all mean? Find out here!

90 300zx missing

Thread Tools
 
Old Sep 30, 2008 | 04:03 PM
  #1 (permalink)  
AustinZ32's Avatar
Thread Starter
...lost in thought.
 
Joined: Sep 2008
Posts: 835
Likes: 0
Default 90 300zx missing

My 90 300zx is missing,it happend before and i took it to the dealer, and they fixed it, one of the spark plug wires were loose. So now, its doing it again, and I checked out all the wires, and the damn thing is still missing...any ideas?
No sarcastic BS either. =)
Reply
Old Sep 30, 2008 | 06:08 PM
  #2 (permalink)  
ZXTT's Avatar
A$$hole
 
Joined: Jul 2006
Posts: 364
Likes: 0
Default

First do a balance test. Pull the coil pack plugs, when you pull one and the RPM's do NOT change, that's your bad cylinder. Pull the injector connector and check for corrosion and clean. Ohm out the injector, it should be between 11-13 ohms, if not replace it. If it's ok the pull then coil pack and replace with a known good one. While replacing it pull the spark plug and compression test that cylinder.
__________________




Originally Posted by Automobile Magazine
The 300ZX Turbo is a dance; it's a song; it's rolling, roaring automotive art. There is no color that doesn't suit it. There is no mood-lifting chemical substance it can't replace.
Reply
Old Sep 30, 2008 | 06:22 PM
  #3 (permalink)  
nismokid's Avatar
The New Jessie James
 
Joined: Dec 2005
Posts: 1,964
Likes: 0
Default

Originally Posted by 240sxenthusiast
My 90 300zx is missing,it happend before and i took it to the dealer, and they fixed it, one of the spark plug wires were loose. So now, its doing it again, and I checked out all the wires, and the damn thing is still missing...any ideas?
No sarcastic BS either. =)
Did you happen to stop by ZDOCS today??
__________________
Reply
Old Oct 1, 2008 | 02:49 AM
  #4 (permalink)  
AustinZ32's Avatar
Thread Starter
...lost in thought.
 
Joined: Sep 2008
Posts: 835
Likes: 0
Default

Originally Posted by nismokid
Did you happen to stop by ZDOCS today??
No I didn't.
Reply
Old Oct 1, 2008 | 02:50 AM
  #5 (permalink)  
AustinZ32's Avatar
Thread Starter
...lost in thought.
 
Joined: Sep 2008
Posts: 835
Likes: 0
Default

Originally Posted by ZXTT
First do a balance test. Pull the coil pack plugs, when you pull one and the RPM's do NOT change, that's your bad cylinder. Pull the injector connector and check for corrosion and clean. Ohm out the injector, it should be between 11-13 ohms, if not replace it. If it's ok the pull then coil pack and replace with a known good one. While replacing it pull the spark plug and compression test that cylinder.
Alright, Thanks man, I'll see what I can do.
Reply




All times are GMT -8. The time now is 05:58 AM.