Clutch advice for SR20DET
Rojya Productions
Thread Starter
Clutch advice for SR20DET
I really need a new clutch, only thing keeping me from ordering one is i don't know exactly what would work best for me yet, hopefully u all can help.
I currently have an Exedy 3 puck with 2600lb pressure plate (supposedly). Since this is my first manual car, i'm used to the high grabbing point and i don't find it a problem with daily driving. However now it slips like crazy and is making a lot of noise soo time for a new clutch.
I've been looking at the ACT Street Disk clutch kit:
Heavy Throttle: ACT HD Clutch Kit, Street Disk, Nissan SR20DET S13/S14, 372 TQ
But i don't get why the 6-puck is cheaper:
ACT 6 puck clutch SR20DET NS1-HDR6
Actually i don't really understand what advantages a pucked clutch has, if anyone could fill me in there.
---
I don't plan on drifting this car, and in the near future i won't be making any crazy power increases. This will just be a street driven SR so that's why i was leaning towards the street disk, but if the 6 puck is better and cheaper shouldn't i get that?
I'm also open to opinions on other clutches around the same price range..
AND also, where is the easiest place to get a rear main seal? Does the fwd SR20DE seal work?
I currently have an Exedy 3 puck with 2600lb pressure plate (supposedly). Since this is my first manual car, i'm used to the high grabbing point and i don't find it a problem with daily driving. However now it slips like crazy and is making a lot of noise soo time for a new clutch.
I've been looking at the ACT Street Disk clutch kit:
Heavy Throttle: ACT HD Clutch Kit, Street Disk, Nissan SR20DET S13/S14, 372 TQ
But i don't get why the 6-puck is cheaper:
ACT 6 puck clutch SR20DET NS1-HDR6
Actually i don't really understand what advantages a pucked clutch has, if anyone could fill me in there.
---
I don't plan on drifting this car, and in the near future i won't be making any crazy power increases. This will just be a street driven SR so that's why i was leaning towards the street disk, but if the 6 puck is better and cheaper shouldn't i get that?
I'm also open to opinions on other clutches around the same price range..
AND also, where is the easiest place to get a rear main seal? Does the fwd SR20DE seal work?
Rojya Productions
Thread Starter
TR Balla Donor Supreme
What about a spec clutch? Maybe a stage 2. Spec makes a pretty good clutch.
__________________
[img]webkit-fake-url://59a75c29-2baa-4768-85b0-a8297a03874c/imagejpeg[/img]Fuck senior honda/Bob
[img]webkit-fake-url://59a75c29-2baa-4768-85b0-a8297a03874c/imagejpeg[/img]Fuck senior honda/Bob
TR Balla Donor Supreme
The spec stage 1 is rated to hold up to 310 ft. lbs. of torque. That should be enough for you, and its under $300 shipped.
__________________
[img]webkit-fake-url://59a75c29-2baa-4768-85b0-a8297a03874c/imagejpeg[/img]Fuck senior honda/Bob
[img]webkit-fake-url://59a75c29-2baa-4768-85b0-a8297a03874c/imagejpeg[/img]Fuck senior honda/Bob
Get an ACT or Exedy.
It all depends on what your doing with the car.. and how you like the pedal pressure.
If you can ball out for one Carbon Clutches are nice. grab really nice and have a surprisingly easy pedal
It all depends on what your doing with the car.. and how you like the pedal pressure.
If you can ball out for one Carbon Clutches are nice. grab really nice and have a surprisingly easy pedal
stay away from spec. total garbage.
exedy stage 1 is fine, and will hold plenty, especially for street driving.
puck clutches grab harder usually, and are lighter. thats about it.
exedy stage 1 is fine, and will hold plenty, especially for street driving.
puck clutches grab harder usually, and are lighter. thats about it.
i have a rps 6 puck i bought new and i love it. it grabs hard as hell and still has a good daily pedal feel. mine is a sprung so its more expensive but the unsprung is cheaper. i paid 4 something for mine
Rojya Productions
Thread Starter
and thanks for the explanation on the puck-ness
i forgot to check RPS, thanks for the recommendation
Do not go with SPEC, they are hit or miss, not something I'd want to deal with again. Personally, I would go with ACT, have used plenty of them and have never had any problems. We have them in stock ready to go also!
__________________
Driven Concepts, LLC
1101A East Hillsborough Ave.
Tampa, Florida 33604
813-236-4500
Monday - Friday 9am - 6pm
WE ARE DIRECT
Tein, GReddy, Buddy Club, Bride, Tanabe, K-Sport, Power Enterprise, etc......
https://www.tamparacing.com/forums/d...ml#post4905630
Driven Concepts, LLC
1101A East Hillsborough Ave.
Tampa, Florida 33604
813-236-4500
Monday - Friday 9am - 6pm
WE ARE DIRECT
Tein, GReddy, Buddy Club, Bride, Tanabe, K-Sport, Power Enterprise, etc......
https://www.tamparacing.com/forums/d...ml#post4905630
Rojya Productions
Thread Starter
Can i get a PM on a price? I might have a friend pick it up and bring it down to me if he comes later this week. I want the ACT street disk kit (372 ft/lb one)