Tampa Racing
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page

Tampa Racing (https://www.tamparacing.com/forums/)
-   Nissan/Infiniti Tech (https://www.tamparacing.com/forums/nissan-infiniti-tech/)
-   -   loud knock (https://www.tamparacing.com/forums/nissan-infiniti-tech/454064-loud-knock.html)

kpcskater941 01-07-2008 04:57 AM
loud knock
 
i have a 96 ka that has a very loud knocking noise, i pulled the engine and i thought it was a rod knock, but it ended up everything is ok on the bottom end, what else could make that same noise? any suggestions would be appreciated!

marble hatch 01-07-2008 09:17 AM
yo it could be your timing chain guide... just take off your valve cover and look at the guide on top and see its if broken/ loose cuz ive seen that happen a whole bunch and that does cause a knocking/ticking sound... lmk whats up..

kpcskater941 01-07-2008 04:03 PM
haha well i looked and i know what exactly your talking about, it looks like it was already been broken off, or gone, someone must of already removed it there is no trace of it. but i thought about the knock when i pulled the engine and right after i took off the tranny, on the fly wheel there was a bolt that was very loose, and it looks like it has been grinding could that be the knocking noise?

wills13 01-07-2008 06:32 PM
Originally Posted by kpcskater941 (Post 4980490)
haha well i looked and i know what exactly your talking about, it looks like it was already been broken off, or gone, someone must of already removed it there is no trace of it. but i thought about the knock when i pulled the engine and right after i took off the tranny, on the fly wheel there was a bolt that was very loose, and it looks like it has been grinding could that be the knocking noise?
It is very very possible that is the case. I had the same problem with my sr.I put some threadlocker on there and tightened them up.. so far so good .

marble hatch 01-08-2008 04:03 AM
Originally Posted by kpcskater941 (Post 4980490)
haha well i looked and i know what exactly your talking about, it looks like it was already been broken off, or gone, someone must of already removed it there is no trace of it. but i thought about the knock when i pulled the engine and right after i took off the tranny, on the fly wheel there was a bolt that was very loose, and it looks like it has been grinding could that be the knocking noise?
wow deffinatly replace that... that is your problem.. your welcome and have a good week. :D

kpcskater941 01-08-2008 07:22 PM
wow that saves me alot of money now! thanks alot!

Muffin man 01-08-2008 07:37 PM
hahaha nubbs motor is phucked!

marble hatch 01-09-2008 04:02 AM
Originally Posted by Muffin man (Post 4985302)
hahaha nubbs motor is phucked!
stfu and keep your honda out of the nissan tech section..

Got boost?? 01-09-2008 07:41 PM
Originally Posted by Muffin man (Post 4985302)
hahaha nubbs motor is phucked!
basically. diaf

Gooser 01-14-2008 06:51 AM
you dumb fucks know he owns a 240 right?


All times are GMT -8. The time now is 01:16 PM.
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands