Fords are good for somethign i guess
Will Drift For Tires
Thread Starter
Join Date: Dec 2005
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
Fords are good for somethign i guess
they have ok fans 
did these up today. total cost. 25 for the fans and 15 for the materials
and they pull better then most aftermarket fans i've seen even without a shroud made yet
did these up today. total cost. 25 for the fans and 15 for the materials
and they pull better then most aftermarket fans i've seen even without a shroud made yet
__________________
Nissan North America - Canton
Nissan North America - Canton
ahhh the smell of rubber
Join Date: Apr 2007
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
what did model car/truck did it come off of and what suppplys???
i want to get rid of my clutch fan sooo baddd lol
i want to get rid of my clutch fan sooo baddd lol
__________________
need a car audio or alarm install
Msg me!
need a car audio or alarm install
Msg me!
Offset-----Less is MORE!!
Join Date: Jan 2004
Posts: 7,160
Likes: 0
Received 0 Likes
on
0 Posts
that the usual taurus fan is it??
__________________
Looking to buy or sell Real Estate, give me a call.
http://liberty-vip.com Flush ≠ VIP. Spread the word in 2012
Looking to buy or sell Real Estate, give me a call.
http://liberty-vip.com Flush ≠ VIP. Spread the word in 2012
Registered User
Join Date: Jan 2007
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
I got some fans from a ford too. what did you use to wire them up?
Will Drift For Tires
Thread Starter
Join Date: Dec 2005
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
i got them from the 3.0 liter ford taurus, not the 3.8 like poeple normally get.
for supplies i got 2, 3 foot box aluminum tubes, a 2 foot strip of 2 inch wide aluminum, and nuts and bolts that i already had.
the box aluminum was for the top and bottom frames, and the strip of aluminum was for the main brackets and the sides so the shroud will have something to close off on the sides.
i wired them straight into the stock a/c fan harness so that they turn on when the a/c is on or when the engine reaches whatever temp that makes the a/c fan kick on
for supplies i got 2, 3 foot box aluminum tubes, a 2 foot strip of 2 inch wide aluminum, and nuts and bolts that i already had.
the box aluminum was for the top and bottom frames, and the strip of aluminum was for the main brackets and the sides so the shroud will have something to close off on the sides.
i wired them straight into the stock a/c fan harness so that they turn on when the a/c is on or when the engine reaches whatever temp that makes the a/c fan kick on
__________________
Nissan North America - Canton
Nissan North America - Canton
