A$$hole Garage

I am building my first 240 it is a s13 coupe,thinking aboout putting silvia front end on it but don't know if you have to change core support or not.also want to build a s13 sr20 black top for it . (turbo included) what amount of horsepower will the trans take (like i said this is my first one so any info will be appreciated). so, let me here your info all is welcome.

SpottedMango

Don't have to change the core support, but will need the headlight brackets.

VENOM 240s-R

stock power should put out around 240+hp

oASHo

yea ull be getting possibly 240.. pending on how u drive.. but yea

A$$hole Garage

Thanks for the info . knowing me i will have a lot more questions on down the line.

A$$hole Garage

this is what i am thinking of doing to the engine, Put a 2.2 stroker crank ,take it out to 86.5, eagle rods, j/e or aries pistons (don't know witch ones yet),port and polish head ,oversized and longer stem valves (new springs ,retainer and all the other stuff that goes with it )When i get to work on it i will see if i need to 0 deck the block or not , 272 cams ,aluminum pulleys(undersize if able to get some)new intake and throttle body ,probably going to start with 770 injectors and go from there. also going to use stand alone so i can get it tuned right.also going with a light weight flywheel and a stage 4 or 5 clutch. this is not going to be an over night project i know so i am in for the long hall, hopping that when i get done i will have one bad ass car .

CameronSx

big bill.

A$$hole Garage

don't know yet forgot to tell turbo size i have two to work with a t3-t4 and a new hybrid t70 i just picked up .also it is going to have 3" intercooler pipes and large fmic. As you can tell i love speed and power.

ImportLuv

Umm..sorry if i interrupt, but pat, how familar are you knowing the in's and out's and the handling of the s-chassis?
If not, i would recommend you to take it easy. Run the stock motor for awhile, then add on as you go.
These cars dont need much power to have fun with. But that of course depends on what the car will be used for.
250-300hp to the wheels, not to the crank, is far more than what most people need.

can you clearify that. A question was asked on how much abuse a stock transmission could take.

oh yeah, yeah yeah yea yeah yeah yea yeah yeah yea yeah yeah yea seems right yeah yeah yeah

A$$hole Garage

i am planning on some drag racing , and doing some or trying to do some drifting (or learning to ) mainly just for fun and the ability to say i did it. the chassis i have is a 89 coupe that has been caged ,and i am planning to do some other mods to chassis , have done some circle track racing and have built numerous mustangs and other cars for same , also have done many miles down the quarter mile in my day. any and all info on s chassis is always appreciated .