to check the codes get the ecu, on the opposite side of the pinouts there is a red led, next to it a dial. Get a tiny philips head screwdriver and, with the key in the ON position(not running) turn the dial all the way to the right..wait a second turn it all the way back to the left. Lights should blink. The first digit will be really slow, the second, really fast. Record it and report back here what it says..

 

when reading the codes it got annoying but i got 12,13,14,34 im going to find a tps sensor today ima go by a couple of shops and try to get one

 

i changed the tps sensor and its still doing it

 

i asume its a ka24de, i would replace fuel filter first, fuel pump seconf or even the fuel press regulator. the codes could be getting trigered by a lean condition. try putting a walbro. if you need towing service and/or repair, give me a call at the shop. thanks.

 

well, I guess he's going to be replacing the fuel pump and the tank becuase the fuel is orange and I don't think that's good...

 

yep,, now me and the mad scientist are gonna have to tear down the gas tank and fuel pump and replace the gas tank the guy let rust up, i might be needing some over night parts from the junk yard