i have 2 questions about something that's been going on with my SR lately.

1. I noticed on my Greddy boost controller, when i first floor the gas, the PSI goes kinda high (like 10-11psi), but then about a second later (while i still have full throttle) its drops down evens out at about 6.5-7.9psi. I though it's supposed 2 stay at high psi because the setting i put on it is for 12.5psi, not drop back down to high 7psi. Is that normal or what's going on??

and 2. I was on the highway, with the gas on full throttle, and it would sometimes bog every now and then for some reason for about a second. Basically, when it's spooling at full throttle, it will sometimes bog itself. What going on with that?

I know it's a lot of reading, but Im just trying to make it as clear as possible. Hellp!! thanks.

 

You don't hear a beep when the car bogs do you? You're not hitting a preset boost limit on the EBC? Mine feels like I'm hitting a brick wall when it overboosts and limits down 15%

 

na, i don't hear the beep. @ what percent is it supposed 2 be for the limiter to be off?? I have it set @ 0%.

 

well 0% is just how much it will limit pressure when it overboosts. The warning is where it will start to beep.

 

ya. The warning is on 145 (14.5psi)

 

anyone??

 

need helllp