Nissan/Infiniti Tech SR20DET? RB26DETT? VQ35DE? What's it all mean? Find out here!

Need SR/SOHC KA MAFs - SR problems

Old Oct 21, 2006 | 08:02 AM
  #1 (permalink)  
+Waldo+'s Avatar
Thread Starter
Electronicals master ;P
 
Joined: Mar 2005
Posts: 7,408
Likes: 0
Exclamation Need SR/SOHC KA MAFs - SR problems

Was driving home last night and the car starts to sputter real bad and wont get over about 2,000rpm. so i stop and check for boost leaks and cant find any, so limp it to my friends house and check the plugs and all are fouled to shit, i put new plugs in and they fouled even worse after only driving it about 100 ft, so it is runnign super rich, the turbo is not comming outa vaccum it is just sitting like 2 notches below the 0 so the car wont run over 2000 like i said.any ideas????? any imput is greatly appreciated
__________________
Sponsored By Carrabba's

R.I.P. Tim Aldrich
Reply
Old Oct 21, 2006 | 08:31 AM
  #2 (permalink)  
carcustomizer's Avatar
Carbon Fiber/Nismo Addict
 
Joined: Jul 2004
Posts: 1,138
Likes: 0
Default

are u blowing black smoke everywhere?? if so, look at ur upper 02 sensor where the pipe of the back of turbo meets with the downpipe
__________________
- Noel

Listen to Trance, House, and/or Progressive music? Check out my mixes, I think you might like 'em



Vehicular Résumé
'93 Nissan 240sx Hatch (Sold)
'91 Nissan 240sx Hatch (Sold)
'91 Nissan Maxima SE (Died [Blown Tranny @ 250k+ mi])
Reply
Old Oct 21, 2006 | 10:32 AM
  #3 (permalink)  
+Waldo+'s Avatar
Thread Starter
Electronicals master ;P
 
Joined: Mar 2005
Posts: 7,408
Likes: 0
Default need a red top MAF asap

if anyone has one please call and i will pik up as soon as possible
813-625-0169
__________________
Sponsored By Carrabba's

R.I.P. Tim Aldrich
Reply
Old Oct 21, 2006 | 10:44 AM
  #4 (permalink)  
+Waldo+'s Avatar
Thread Starter
Electronicals master ;P
 
Joined: Mar 2005
Posts: 7,408
Likes: 0
Default

yes its smoking pretty bad, my freinds told me to check my maf because of the way it wont rev past 2500, but ill check that too just to be safe. if u kno of any one with a good maf please met me kno. thanks for the imput
__________________
Sponsored By Carrabba's

R.I.P. Tim Aldrich
Reply
Old Oct 21, 2006 | 10:45 AM
  #5 (permalink)  
Anthony R's Avatar
SAL-T
 
Joined: May 2005
Posts: 3,159
Likes: 0
Default

ha. i can take a look at it sunday lmk hit me up playa.
__________________
Matthew "RudeBoy" Nugent 2/03/88-04/01/09
Reply
Old Oct 21, 2006 | 11:19 AM
  #6 (permalink)  
+Waldo+'s Avatar
Thread Starter
Electronicals master ;P
 
Joined: Mar 2005
Posts: 7,408
Likes: 0
Default

aiight son, i should have it back to the house by then, got homecomming tonight...holla. kyle said hes bout 90% sure its the maf,so find me one!!!!
__________________
Sponsored By Carrabba's

R.I.P. Tim Aldrich
Reply
Old Oct 21, 2006 | 11:24 AM
  #7 (permalink)  
Anthony R's Avatar
SAL-T
 
Joined: May 2005
Posts: 3,159
Likes: 0
Default

Originally Posted by ValricoBoi813
aiight son, i should have it back to the house by then, got homecomming tonight...holla. kyle said hes bout 90% sure its the maf,so find me one!!!!

i'll c what in can do. don't listen to kyle he has a a bad rob bearing b/c he stupid.lol
__________________
Matthew "RudeBoy" Nugent 2/03/88-04/01/09
Reply
Old Oct 21, 2006 | 11:26 AM
  #8 (permalink)  
+Waldo+'s Avatar
Thread Starter
Electronicals master ;P
 
Joined: Mar 2005
Posts: 7,408
Likes: 0
Default

well i was just happy to hear a easy fix, dose it not sound like the MAF??
__________________
Sponsored By Carrabba's

R.I.P. Tim Aldrich
Reply
Old Oct 21, 2006 | 11:39 AM
  #9 (permalink)  
Anthony R's Avatar
SAL-T
 
Joined: May 2005
Posts: 3,159
Likes: 0
Default

Originally Posted by ValricoBoi813
well i was just happy to hear a easy fix, dose it not sound like the MAF??

??? well check it out
__________________
Matthew "RudeBoy" Nugent 2/03/88-04/01/09
Reply
Old Oct 21, 2006 | 11:54 AM
  #10 (permalink)  
+Waldo+'s Avatar
Thread Starter
Electronicals master ;P
 
Joined: Mar 2005
Posts: 7,408
Likes: 0
Default

bitch it did, but cant see nothin, plug/wires seem fine so i think it just went out...
__________________
Sponsored By Carrabba's

R.I.P. Tim Aldrich
Reply


All times are GMT -8. The time now is 11:09 AM.