does anyone know what i have to do to fix my ignition problem, my key falls out when i take sharp turns, can i just go i buy a new ignition or am i SOL

 

im sorry but i must make this comment before anyone else does....

it falls out of the ignition when you take a sharp turn? HAHAHAHAHAHAHAHAHAHAHAHAHAHAAAHHAHAHAHAHA


ok im done.... hopefully its not anythign major

 

It does hurt anything, why not just leave it if not you'll have to replace the ignition.

 

Make your own stubby screwdriver key.

jb weld the bitch in.


install alarm.

 

i believe that the ignition is rivitted on the colum.

there is a little lever if you take the plastic off around it. where the key go's.
when you do that look at the key and right behind it is the little lever its got a red tip.
make sure thats not stuck in the middle or it will happen sometimes. My key got stuck in the ignition alot and that was the problem mabye same issue. just my 0.02.

 

take your vin number to the dealership get new key

yours in worn out

 

You'll need the VIN and the 4 digit secret code from the glove box. Hope you haven't lost it!

 

My work truck does that, first time i was like WTF as the keychain hit the ground.

Find a junkyard car, and steal the doors, trunk, and ignition keysets...

the steering column bolts have nothing to grip onto, so you will have to hammer+chizel rotate them out, and then you can replace them with standard bolts (hex style fit better, because tool goes inside, and not outside, limited work area)

 

stop taking sharp turns

 

yeah right

anyway, there is another problem with it. i can start my car with any objest that will fit in the ign.