on my triple projectors the outer projector has nothing to hold the bulb in.
any suggestions. thanks

 

Its just like wire bent in that secures it just like on the second projector. You can try to make your own, I dont think it would be to hard.

 

im missing the three prong connector

 

would it be possible to use a h7 bulb?

 

low beam - h3
high beam - h1
fog light - h3c

 

actually h1 for the low beam and h3 for hi. but theres nothing to hold the bulb in. basically missing the male end connector for the low beams

 

it should have came with the lights of course. try ebay or other nissan models with projectors.

 

You were close but you got one mixed up.

Both the low beam and the fog lights are H3c's
High beams are h3


In the pic it looks like someone put an H4 bulb in the low beam thats why the H3c's wont hold. Those arent the factory bulbs in the circled spots.

 

Dual Projectors:
Lowbeams - H3c
Highbeams - H3
Foglamps - H3c

Triple Projectors:
Lowbeams - H1
Highbeams - H3
Foglamps - H3c

Halogens:
Foglamps - H3c
Hi/Lo - H4

 

im just going to try to tape the bulb in for a temporary fix. b/c i only have hi beams and im sure other drivers are not appreciating that