Finally, after owning and restoring my 93 coupe for 14 months, the car finally gets some rollers, stoppers, and sus! I've been collecting these parts for almost as long as I've owned the car. It only took me 5.5 total hours, spread across 2 days. Tell me what you think. I'll be out at Bennigan's and QSL every week.

Parts installed this weekend:
- 5-lug front and rear with new ball joints, nismo 60mm studs, and kyokugen nuts
- 26mm Z32 brakes up front, painted black, with new rotors/pads, stainless lines, and a new nissan shim kit. Also stock rears got new rotors.
- Ground control sleeves on KYB AGX's. Jonas' old sus is still alive! This is as low as I dare go on a shock type setup. 1.25-1.5" wheel gap all around.
- R32 GT-R wheels with Bridgestone RE-01's 225/50/16. Wheels are 16x8 +30.

Here are the pics:

 

nice and clean epstein, and where did you get those wheels from?

 

+1

 

Very nice

 

Thanks guys! I bought the wheels from RB Motoring. They were on eBay and didn't sell, so I made them an offer through email. It was more than I planned on spending, but the wheels were in almost new condition with 75% on the tires. Once Taka gets his container into Tampa, I'll have my Cusco Zero2's. Then the car will get another 1.5" drop.

 

Damn hot looking!

 

+1; no matter what you paid for the wheels, they were worth it! They look real nice on there. Your patience paid off well, nice work!

John

 

Looks beautiful Chris. Come out to a Dale Mabry meet!
-Jeff

 

Very nice indeed........

Rinku