Sohc injector help
Thread Starter
Why So Serious?
Joined: Feb 2005
Posts: 3,242
Likes: 0
Sohc injector help
Ok how u do u get the o ring to seat properly on the injector while putting it back in the rail, ive pinched 6 o-rings already.
__________________
No Front Bumper Mafia crew#1 since 04'
The original 350Z Blue 240sx
No Front Bumper Mafia crew#1 since 04'
The original 350Z Blue 240sx
Thread Starter
Why So Serious?
Joined: Feb 2005
Posts: 3,242
Likes: 0
Originally Posted by Taylor Durden
i usually just do an SR swap
__________________
No Front Bumper Mafia crew#1 since 04'
The original 350Z Blue 240sx
No Front Bumper Mafia crew#1 since 04'
The original 350Z Blue 240sx
highway whore
Joined: Oct 2003
Posts: 448
Likes: 0
Originally Posted by asia989
did that now the injector is leaking, i think the bolt hole is stripped
well then, i doubt the pinch o ring is the problem, anyways, i used WD 40. never had a problem with that.
__________________
Thread Starter
Why So Serious?
Joined: Feb 2005
Posts: 3,242
Likes: 0
fixed it i had the worng o ring size, the fat rubber peice that sits on the injector was also shot.
__________________
No Front Bumper Mafia crew#1 since 04'
The original 350Z Blue 240sx
No Front Bumper Mafia crew#1 since 04'
The original 350Z Blue 240sx
