I am looking for a Nissan tech to assist me in a SR20DET build. I need to do this ASAP and would like to know what a job like this will cost. If you know anyone that is interested in upgrading and installing the following parts, please let me know.

Who ever is interested in helping me on this project must know that it should not take more than 2 days & will need to make sure the person can 100% install and tune the car if needed once everything is done. This is not something I want diced up into small weekend projects so please know that this will be a one shot deal.

The motor will be removed for simplicity parts install and here is the parts list.

- Garrett GT2871R .64 AR
- Greddy VSPL FMIC
- Greddy 1.2mm Head Gasket
- Greddy Rocker Arm Stoppers
- Greddy Oil Catch Can
- HKS SSQ BOV
- ARP Head Studs
- Koyo Radiator
- New SR20DET Water Pump
- New SR20DET Seals
- NGK SR20DET Copper Plugs
- Nissan 555cc injectors
- Nissan Z32 MAF
- Taka Braided Oil Lines
- Exedy Clutch/Plate
- Enthrapy ROM Tuned ECU

I don't have the appropriate tools to handle such technical jobs like removing and reseating head gasket/valve springs.

Please let me know what a job like this will cost and if anyone knows someone that will be able to do this for me.

 

Did you call XAT Racing? I Hear they are pretty good, Maybe also get with Jonas about something like that, he has experience with SR20's.

 

XAT is backup for months but who is Jonas?

 

call up CFP(Central Florida Performace) and ask for sean. He does great work and right now is doing my turbo setup on my FWD SR20. I honestly would trust my car in the hands of CFP alot more then XAT. The number is 727-572-4340.

 

all the good shops are gonna be busy you are not just gonna get it done 2 days from now with XAT or any of the great entrepeneurs that left them and started there own shop they are all pretty busy. You would still have to get tuned at XAT but try Taylor at Durden Perfab too.

 

a big no on jonas, or xat.
jonas doesnt do motor work, and i wouldnt let xat rotate the tires on my bicycle.

taylor is you best bet for getting it done correctly. or maybe enjuku.

 

Yeah, I passed on Enjuku when they passed the $1,000 mark...I will see what I can find and I feel the same about Enjuku as you do about XAT.

 

If you're expecting to do all that for under $1,000 you're smoking rocks.

Give Taylor of Durden Perfab a call... 813-766-9304

He smokes rocks too.

 

also, who built the motor for z fevers vert?
the one that lasted like 3 weeks.

whoever that was, dont go there either.

 

Just fyi you have over say 5k in parts alone....installing them is a new world...