Nissan/Infiniti Tech SR20DET? RB26DETT? VQ35DE? What's it all mean? Find out here!

So she overheats....

Thread Tools
 
Old Feb 16, 2005 | 04:20 AM
  #1 (permalink)  
cubanprince1's Avatar
Thread Starter
shift.............vroooom
 
Joined: Feb 2004
Posts: 1,825
Likes: 0
Default So she overheats....

So yesterday i ran it hard and when i parked idle was funny, so i started messing with the afc and i noticed oil pressure drop to like 13 - 14 psi....wtf!? At this point the engine had been running for a while. I took the spark plugs out and some of the pistons had little spots on them....like detonation. Theres carbon and in the carbon theres little dots of clear. So car is sitting there and my fans decide to give out on me. After a while the fucker overheats! So i shut her off, fix the fans, go around the block to recycle the water back in the block after its cool. Now she has 20 - 21 psi of oil pressure and it goes all the way up to 60 and maybe a bit more while cruising. How can i tell if the motor is good or not? Draining the oil is the only way? This morning i cranked her up and started up fine. man......shit....




Norlandt
__________________


http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....
Reply
Old Feb 16, 2005 | 05:28 AM
  #2 (permalink)  
StreetRacingOnline's Avatar
Registered User
 
Joined: Sep 2000
Posts: 1,608
Likes: 0
Default

who the hell has been workign on your car bro. seriously everyday i see a post that something is wrong with it. Please do yourself a favor and take it to a shop to have it looked over. the path your taking now, that motor will be toast in no time....
Reply
Old Feb 16, 2005 | 05:52 AM
  #3 (permalink)  
osama tim laden's Avatar
kings cannot fall.
 
Joined: Sep 2004
Posts: 7,784
Likes: 0
Default

omg !@!@#!#@!$
Reply
Old Feb 16, 2005 | 06:03 AM
  #4 (permalink)  
cubanprince1's Avatar
Thread Starter
shift.............vroooom
 
Joined: Feb 2004
Posts: 1,825
Likes: 0
Default

+1
__________________


http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....
Reply
Old Feb 16, 2005 | 12:13 PM
  #5 (permalink)  
cubanprince1's Avatar
Thread Starter
shift.............vroooom
 
Joined: Feb 2004
Posts: 1,825
Likes: 0
Default

ran a compression test and it was 160 all across. Oil pressure is reading fine. (thank god).
__________________


http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....
Reply
Old Feb 16, 2005 | 12:34 PM
  #6 (permalink)  
TNathe's Avatar
Registered User
 
Joined: Jan 2003
Posts: 18,565
Likes: 0
Default

you got gremlins bro. lots of em too!
__________________
Reply
Old Feb 16, 2005 | 01:00 PM
  #7 (permalink)  
cubanprince1's Avatar
Thread Starter
shift.............vroooom
 
Joined: Feb 2004
Posts: 1,825
Likes: 0
Default

lol y u say that?
__________________


http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....
Reply
Old Feb 16, 2005 | 08:33 PM
  #9 (permalink)  
cubanprince1's Avatar
Thread Starter
shift.............vroooom
 
Joined: Feb 2004
Posts: 1,825
Likes: 0
Default

Man, i can handle a fast car but, the shit that happens to me is like....something u see in a movie. Must be bad decisions on mechanic maybe? Whatever it is, i dont know.....but oh lord comeon this is bullshit. As much as i sound like a little bitch but, i dont deserve this shit........well, drained the oil at night liek a dumbass because its when i have time and in the light i thought i saw like sparklish in the oil, but i wasnt sure because i had stuck my hand in there to check for metal pieces or something and my hand was dirty (grains of sand and put hand on concrete). So ill drain the oil again in a few days or something and see what goes on.
__________________


http://inductionperformance.com/
Induction Performance - 727.505.1423
AEM EMS Tuning, Builds, Assembly, Custom Kits, Installs and more.....

Last edited by cubanprince1; Feb 16, 2005 at 08:39 PM.
Reply



All times are GMT -8. The time now is 06:33 PM.