280zx is now +clutch
Guest
Posts: n/a
Clutch installed in ~4 hours as expected, took it around from 2pm until about 11pm and had no issues, but chatter.
Around midnight however, the clutch became difficult to push in, and felt like a metal grinding was goin on. It was also more difficult to shift. I did not have the tools ot retap the two tranny bolts that made my initial driveshaft break. I fear the tranny has shifted away from the block again because of this, and Im going to have to retap those holes, and get some new ones installed this weekend.
I was going to check it out today, but Im simply TOO sore to do this 2 days in a row.
The clutch grabs like no one's business. I took 380 grit sand paper to the flywheel, and to the pressure plate. Worked out well. Still using stock fly and plate.
22psi and no slipeage. Im very happy with it.
Go Bay City Clutch.
On a side note, boost still wont hold for long. SDS randomly leans out and car will yank timing. I thought the MAF would fix this, but I was wrong. I now have no idea, unless the injectors are dying on me, or the ECU is randomly going bad?
Around midnight however, the clutch became difficult to push in, and felt like a metal grinding was goin on. It was also more difficult to shift. I did not have the tools ot retap the two tranny bolts that made my initial driveshaft break. I fear the tranny has shifted away from the block again because of this, and Im going to have to retap those holes, and get some new ones installed this weekend.
I was going to check it out today, but Im simply TOO sore to do this 2 days in a row.
The clutch grabs like no one's business. I took 380 grit sand paper to the flywheel, and to the pressure plate. Worked out well. Still using stock fly and plate.
22psi and no slipeage. Im very happy with it.
Go Bay City Clutch.
On a side note, boost still wont hold for long. SDS randomly leans out and car will yank timing. I thought the MAF would fix this, but I was wrong. I now have no idea, unless the injectors are dying on me, or the ECU is randomly going bad?
Megasquirt Ultra will own you my friend. Good luck on the lean issues.
__________________

There are points in life where one looks at his or her situation and says "how the fook did i get here?" ... this is one of those instances....

There are points in life where one looks at his or her situation and says "how the fook did i get here?" ... this is one of those instances....


