Nissan/Infiniti Tech SR20DET? RB26DETT? VQ35DE? What's it all mean? Find out here!

s13 idle problems

Thread Tools
 
Old Aug 8, 2004 | 05:27 PM
  #1 (permalink)  
SilvCivOn17s's Avatar
Thread Starter
cause the whistle goes...
 
Joined: Jul 2003
Posts: 3,741
Likes: 0
Default s13 idle problems

my friend just got a 93 240 w/ the stock ka and it's having some idling issues.w/ the a/c off,it stalls right out immediately after its started,but if u have the a/c on,it idles real low(about 500rpm) and it acts like it wants to stall.any comments/suggestions on what u think this may be?thanks alot
__________________
R.I.P. Brian Nichols 02/07/1989-11/23/2008
Reply
Old Aug 8, 2004 | 06:18 PM
  #2 (permalink)  
steve's Avatar
madpom
 
Joined: Dec 2001
Posts: 2,973
Likes: 0
Default

bump the idle up a bit
Reply
Old Aug 8, 2004 | 06:26 PM
  #3 (permalink)  
SilvCivOn17s's Avatar
Thread Starter
cause the whistle goes...
 
Joined: Jul 2003
Posts: 3,741
Likes: 0
Default

is that idle adjustment screw located on the throtle body?i kinda looked but couldnt find it
__________________
R.I.P. Brian Nichols 02/07/1989-11/23/2008
Reply
Old Aug 12, 2004 | 07:12 PM
  #4 (permalink)  
SilvCivOn17s's Avatar
Thread Starter
cause the whistle goes...
 
Joined: Jul 2003
Posts: 3,741
Likes: 0
Default

any more suggestions?
__________________
R.I.P. Brian Nichols 02/07/1989-11/23/2008
Reply
Old Aug 12, 2004 | 08:34 PM
  #5 (permalink)  
Sohc4now's Avatar
^^^I'm with stupid
 
Joined: Jul 2004
Posts: 1,279
Likes: 0
Default

Make sure you disconnect the TPS before you adjust the idle
__________________
Reply
Old Aug 13, 2004 | 01:11 PM
  #6 (permalink)  
Epstein's Avatar
Retired
 
Joined: Jan 2003
Posts: 5,095
Likes: 0
Default

What I do is disconnect the ~18pin connector right at the throttle body. Then adjust the idle screw located between the firewall and the rear section of the intake manifold. Adjust the screw until it's around 600rpm. Then, plug the connector back together.
__________________
Reply




All times are GMT -8. The time now is 04:43 AM.