240sx oil and water temp wire hook up
Thread Starter
Master of All
Joined: Nov 2002
Posts: 144
Likes: 0
240sx oil and water temp wire hook up
ok i have a 92 240sx and i have a oil pressure and water temp gauge both mechanical and i want to know where to hook them up to if you could help me let me know
__________________
Easy E
Easy E
No Ants Drift Member
Joined: Jun 2000
Posts: 4,117
Likes: 0
i do not recommend mechanical gauges. go electric.
the oil pressure sender is next to the oil filter on the side of the motor. your sender would go there
for water temp, there are two water temp sensors on the motor. they are located on the portion of the intake manifold where the upper radiator hose connects. one has two wires. leave it. the other sensor is a single wire sensor. this operates your gauge cluster temp gauge. remove it and install your new sender there. rethreading may be necessary
the oil pressure sender is next to the oil filter on the side of the motor. your sender would go there
for water temp, there are two water temp sensors on the motor. they are located on the portion of the intake manifold where the upper radiator hose connects. one has two wires. leave it. the other sensor is a single wire sensor. this operates your gauge cluster temp gauge. remove it and install your new sender there. rethreading may be necessary
__________________
RIP Tim. i miss you, buddy
RIP Tim. i miss you, buddy
No Ants Drift Member
Joined: Jun 2000
Posts: 4,117
Likes: 0
exactly. last thing you need is for that cheesey plastic line to break and not only spray YOU down with oil, but also run your motor dry eventually.
__________________
RIP Tim. i miss you, buddy
RIP Tim. i miss you, buddy
