madd thanks to Mattback for the clutch. i just put a sr clutch in my twin cam KA. if you can find a decent used sr clutch cheap all you need to do to put it in your ka is have the flywheel erdrilled for the sr clutch bolt pattern. and i got a guy with a machine shop that did it for me for $90. so the hell with spending $300+ for a ka clutch when you know you'll end up swapping to an sr anyway so just buy an sr clutch and put it in your ka until you get your sr.

 

from the looks of things, i might even be able to use the flywheel of a different nissan engine that not only has the bolt pattern of the SR clutch, but the sma ebolt pattern as the KA flywheel mount.

 

Thats a good idea....never would of thought about it?

 

280zx flywheels and nissan truck flywheels use the 240mm clutch aslo

as do z31 300zxs, rb25s, z24is, all sorts of good motors ;-0

 

yeah i remember wanting the 240mm setup like TY did on freshalloy.

the 280 flywheel fits but the dowel pin or whatever is wrong and i think has to be redone, or its the 'hub' size maybe? i dont remember but i know that a company called design products makes a specific 240mm ka clutch and then buy an act 280zx turbo clutch, which are apparently rated at 450 ft/lbs of torque and i think its full face?

 

I am working on bringing the KA guys a lightweight steel flywheel that has the sr clutch pattern on it