i have a question (sorry to drag this off subject) but whats the diffrance between the z32 clip/harness and the tomei z32 harness for the s13?

 

this might get me flamed but..what are MAFS?? i figure its better to ask then not know what it is!!

*puts on flame suit*

 

Jonas, I get them cheap. So why not sell them cheap? It's used in case you didn't know. Let me know if you're interested.

Only1.3, the difference is in the price. If you buy a Z32 MAFS without a plug it might be worth it to buy the Tomei unit.

 

MAFS=Mass Airflow Sensor

a.k.a. MAS, AFM

 

the tomei one has correctly colored wires to connect to an sr20, but u dont need it, there are plenty of people here that know how to hook one up just using regular shielded wire.

also, i dont think j30 mafs are the same, i think they are sized comparable to maxima mafs or something. i recall scott saying to make sure the #s on the side of the maf say something specific or else the j30/maxima ones somehow are not the same and will max out way before a z32

 

as i learned from the dyno day.. are the last letters/numbers on the barcode n62??? i am definitely planning on getting 3z mafs very soon iam just looking for places right now and good prices...ill be sure to send you a pm when iam ready to get one though...thanks

 

Yeah, N62. Let me know when you want it...although I can't promise you I'll still have it.

 

j30 has less restriction for hp than the z32 mafs. Stick with the z32 mafs b/c it can support around 500hp. you can buy those mafs cheap as long you look around!.

 

is a maxima MAFS bigger ( or can it handle more hp) than the stock 240 MAFS??

 

well to come out, basically i just want a mafs that will hold up roughly 1 bar of boost... iam not really aiming for high hp...