so i've been thinkin of doing a nitrous set up on my 3g and just wondering wat i would need to get started i'm sure a regular kit will come with everything i need but tha info i need is as far as my motor goes what should i do to it to beef it up. I'm competly stupid when it comes to nitrous cuz i've never had a nitrous car so any advice will help oh and specs on the motor are below

Motor : 6G72 (3.0 V6)

Mileage: 105,000 (ish)

motors been a work in progress:

New plugs and wires
New water pump
New Cam shaft seals
New crank shaft seals
New Timing belt
New Timing pulley
New idler
New tensionor(sp?)
New radiator
New Valve cover gaskets

tryin to get the motor back to top shape before the nitrous comes anywhere near the motor like i said anyone that can help its really appreciated

Thanx
Josh

 

Well you don't need to much for motor prep if your going to be using a basic kit with a not so big shot. you could start with a fuel pump and replace your fuel filter, as long as enough fuel is getting to the motor you should be fine. other then that just make sure the car is in good working order. I would also recommend you get a bottle heater to go with the nitrous kit, bottle pressure is key.

 

okay and i'm only going with a 75 shot 100 at the very most. ok fuel pump and filter thanx man. Anything else? lol

 

cold plugs,make sure your nitrous kit comes with a wot switch and work your way up with the shot. that's about it!

 

Spray Away!

 

Try the 75 shot with new plugs.
Spray a few times and then check the plugs to make sure it's not running lean.

 

a wideband wouldn't hurt, and a compression check should be done as well..I have a nitrous kit I don't need anymore...lines, solenoids, bottle, brackets, pills, purge, wot switch, and everything else if your interested. I also have a new in box AEM UEGO wideband

 

lol thanx chris send me some pics or shared_pm me a price i'm deff interested. I'll have to let drew at darkside take a look at everything to make sure its what i need.