My idle in my evo9 was set through the mivec so it can be more loopy since i have cams but i keep getting cel(po 300-misfire)and lately i've noticed on my wideband that the car runs a lot richer then before.When the cel is erased its back to normal afr's,so i need help to adjust it back to normal (no more loopy idle).I have Gsc S1 cams.I was thinking about Brother's racing maybe if they can do it cause i don't feel like going to scott at ttp its too far-thanks Martin

 

Shut the codes off in the ecu. If you go on evo m you will find directions to shut them off in the ecuflash section.

 

i just want my idle to be set back to normal and to do that you have to go to mivec map through the ecu

 

i think i have to call Rob or Dave I've heard they're pretty good with evo's

 

They are good with them. They know more about AEM than Stock ECU.

 

who do you recommend then

 

I just tuned my Stock ECU Evo IX in the thread above...

 

i sent you a pm

 

I would call Alpha. He is in the Tampa area. He is one of the Best tuners I have ever met.

 

do you have his phone number