Well thats funny how the kid who bought your car ran it out of oil in just a day or two an then blew it up.. I didn't know that these car lose that much oil. Maybe who ever worked on your car needs some lessons.... I drove your car an knew it was junk.......... (that sounds like a scam right there) I could not even sell a car in that kind of condition. Why would you drive 1hr 30min for a motor if you can get them everywhere so cheap??????????? Trust me i didn't need to sell that motor by any means. I never knew the bore size until you called an i clean off the old piston an saw .50 I couldn't even get you to look at the block before you took it. I sold you a good crank an a good block an that is all. you must be dumb if you think i told you it was stock bore?????? cause i didn't know. an if you mechanic never mic it what good is he. cause i would never build a block before checking it out. Yea an i did tell you i could have sold the block for $250 an you know what they would have probably check the bore size before they ordered pistons. An the truth is i called you several times to tell you i would have bought your wrong pistons but you failed to answer your phone. Thats right I am sitting here laughing my ass off cause you called me every day begging for a block. but everybody else is got tons of them $150 cheap. its all over you make a big deal out of nothing. Go cry to your mechanic who still drives a go cart. I do this as a hobby for fun i have no intentions on trying to rip someone off..... If i felt like acting like a lil kid i would tell both of you where you can go but i have more class than that. so thanks you fellas an have a nice day! LMAO................

 

There is enough said here, your looking like a bigger asshole by the minute, Your not the only one that knows the story behind the car. All the other shops that know the car will have stories to contridict yours, so you don't hold any weight with your false attempts at bashing it. Also you drove the car and enjoyed it,and said it was faster than your own was. Your Brother didn't buy the car because you thought I was asking to much,since you were so good at cheating others out there cars for nothing. Hey I know its all apart of your business, telling people shit is wrong with cars that obviously isn't so you can get it cheap and resell it. You have even laughed about it in the stories you have shared with me, and yes it was funny hearing from you what people would actually believe and fall for,but you're not supposed to do that to "friends".

With that being said, I'm going to do something that in the whole history of me being on TR no one would think I would ever do. I'm going to let you ruin your own character and be done with it. Have a good day Damon, and may you not be able to wrong as many people this new yr.

This whole thing stemming from me saying that I'm not gonna do business with him anymore and so he starts this shit to cover his own guilt.

Happy New yr to you and all who reads this, sorry to the thread starter for this getting out of hand.

 

Dude,you are terminally stupid,more class?People like you are the reason nobody trusts anyone anymore.You are in it for yourself,and fuck everyone else.I heard the conversation,dude tried to explain to you about u buyin the stock bore pistons 4 or 5 times,and you weren't havin it.
Also,learn to read-it was low on oil,and overheated,dumb shit,not run out of oil.
You are no fuckin mechanic,you backyard half assed wannabe.
I challange you and your "abilities" any day of the week on ANY motor.
You were tryin to make money off one of your "friends",and that was all you were concerned with.
People of TR I know THE_ONE for many years,if nothing else the man builds some fast and solid vehicles.His heart,which is bigger than his brain sometimes,was the cause of us fixing the car for this other kid.
That car was solid until the dude overheated it and thrashed the bearings.
Now Damon is tryin to make himself out to be someone who is being bashed for no reason,and he's not.
If you want something done,bring it to him...if you want it done RIGHT,bring it to Brotherz,Jerry,Darkside,or myself,aside from the obvious (Damon's a dipshit) his "shop" is also smaller and less set up than my broomcloset.
(not saying he's COMPLETELY incompetant),because he does have enough good feedback to give him WAYYY too big of a head,but that doesnt mean that you have the right to pick and choose who you screw,and using your "good name & rep" to defend yourself,and justify what you do,really don't work,and it's just plain wrong.
All shops have their mistakes,it's unavoidable--the difference between us (REAL shops) and you is WE all accept and make good on our mistakes--you just find a way around them,and a way to make undeserved money off yours.
I'm not THE_ONE,so I'm not gonna e-battle you all day-anyone with an IQ higher than their shoe size can see whats really going on--admit it,you fucked up,and we (being the troopers we are) rose above,got it done and move on.
You started this whole thing--THE_ONE didn't say 2 words bad about you to anyone,and it shows your real character the way YOU chose to handle things.
With that,i bid you good day,and good luck...and be careful of the toes you step on today---they may be connected to ass you have to kiss tomorrow.

 

wow who taught you that over heating a motor sends a rod through the block. some mechanic ok (Tony from sindwinder) or who sells a car with little or no oil. an you own a shop does it have a name.. i only do this has a hobby so why would i want to waste money to store everyones car in a huge shop. so are you ever going to tell me where you can get a good block an crank for $150. So every one remember who you buy a car from these people dont know how to check the oil an the car will over heat right after you buy it... gotcha.....an if you call making money off of something that you sold for the same price you paid for it. I wish you the best of luck....

 

YOU FUCKING ILLITERATE,INCOMPETANT,NON ATTENTION TO DETAIL HAVING COCKSUCKER!!!!!
Who said ANYTHING about a rod coming out the block?Where are you getting your story/facts from?Are you makin them up as you go along??
People like you should be put to sleep.
THE CAR WAS OVERHEATED,AND LOW ON OIL,YOU FUCKING MORON.
Which caused the bearing in #3 to wipe out completely,#4's bearing broke at the oil hole,every main bearing was squalled,and the thrust part of the thrust bearing was so ate up,that it ruined the block.Thats why we needed a block,thats why we don't assume,assumption is the mother of all fuck ups.Like when your father ASSUMED he pulled out fast enough the night you were made.

 

^ Dude calm down, its not worth it, I have known Damon for a long time and "Lying" is what he does best, its how he runs his business thats why other shops double and triple check everything they get from him. Next he will say something like the whole front end exploded or the car got carried away by Dumbo or something... Your wasting your time with him, he looks worst everytime he posts. Don't bring yourself down to his level he is just trying to get people riled up.

 

you worked up yet ha???? well thats what i was told save your drama an internet hoopla for your boyfriend an have nice day...

 

You guys need to stop.

 

internet hoopla?you started this,stupid.

and dont be mad at me because the cat's out of the bag,and no one is sticking up for you.

cuz deep down every 1 knows what a lying,two bit,spit and tie wire expert you really are.
u got anything else to say, pm me stop messin up someone elses shit (which we all know you are so good at doing)

 

that facts are i sold you a good block an crank for $150 a killer deal. so it needs 20 over pistons what is the big deal.

you said you did not need pistons an rods. why cry boys. If you are to ignorant to mic a block before you put it together that is your fault plain an simple.

My only mistake was to sell you a block an you are one ungrateful pos. i waited 2.5 hrs at my shop for you to pick it up.... it was truley a waste of my time. Why would you even call me for a motor it if I am this person you make me out to be?