Mitsubishi Tech AWD and all things DSM Central

Updated project page

Thread Tools
 
Old Aug 18, 2000 | 06:55 AM
  #1 (permalink)  
The^Thief's Avatar
Thread Starter
Registered User
 
Joined: Jun 2000
Posts: 168
Likes: 0
Default

I added a few updates to my project page thought I would pass them along.
http://tampabay.dsm.org/projects/jpeterso/


------------------

tampabay.dsm.org/members/jpeterso/
tampabay.dsm.org/projects/jpeterso/
V8 SLAYR
__________________
Jeff Peterson - 2006 GTO - Cold Air Inductions CAI, SLP U/D Pulley, FAST Ported Intake, Ported TB, Kooks 1-7/8's, Spintech Mufflers, H-Pipe, Yella Terra 1.7 Rockers, Flowtech Hellion Cam, 255lph Pump, and GMM Ripshifter. 445rwhp 402rwtq SAE
Reply
Old Aug 18, 2000 | 07:40 AM
  #2 (permalink)  
16gAWD's Avatar
Registered User
 
Joined: Jun 2000
Posts: 0
Likes: 0
Default

Are you going to run at Desoto at the end of the month? When you put the 1gen intake mani in did you have to replace the coil packs with a 1gen or just the mounting bracket?

------------------

16gAWD
97 Talon TSI AWD
__________________
James
-------------------------
Just another unreliable fast DSM
http://www27.brinkster.com/awd16g/
Reply
Old Aug 18, 2000 | 07:44 AM
  #3 (permalink)  
16gAWD's Avatar
Registered User
 
Joined: Jun 2000
Posts: 0
Likes: 0
Default

oh yeah dont blind yourself with that shift light. What RPM are you shifting at these days?

------------------

16gAWD
97 Talon TSI AWD
__________________
James
-------------------------
Just another unreliable fast DSM
http://www27.brinkster.com/awd16g/
Reply
Old Aug 18, 2000 | 08:00 AM
  #4 (permalink)  
The^Thief's Avatar
Thread Starter
Registered User
 
Joined: Jun 2000
Posts: 168
Likes: 0
Default

I dont think Ill run until I can buy a set of slicks its just not worth it spinning down the track though the first 3 gears. I cant make any good times like that.

I went ahead and replaced the entire coil pack one was for convience and two mine was pretty old had almost 90k on it.

I put the cover on the shift light at night or it will blind you badly. Im shifting about 7200 on average but with the new cams I need to get the ECU modified so I can run it up higher.



------------------

tampabay.dsm.org/members/jpeterso/
tampabay.dsm.org/projects/jpeterso/
V8 SLAYR
__________________
Jeff Peterson - 2006 GTO - Cold Air Inductions CAI, SLP U/D Pulley, FAST Ported Intake, Ported TB, Kooks 1-7/8's, Spintech Mufflers, H-Pipe, Yella Terra 1.7 Rockers, Flowtech Hellion Cam, 255lph Pump, and GMM Ripshifter. 445rwhp 402rwtq SAE
Reply




All times are GMT -8. The time now is 09:06 PM.