Need some help...

Reply Subscribe

Thread Tools

May 11, 2007 | 10:04 AM

#1 (permalink)

mitsu4g63t

Thread Starter

Almost A Civilian

Joined: Sep 2005

Posts: 308

Likes: 0

Need some help...

I need to relocate my tranny cooler from the left side to the right side (where the smic is) of my 2g gst (automatic obviously) in order to connect my fmic piping, anybody ever done this before?

__________________

May 11, 2007 | 02:20 PM

#2 (permalink)

So_Sli

Banned

Joined: Apr 2005

Posts: 1,107

Likes: 0

It'll be a LOT easier to just re-adjust the IC pipes....otherwise you're in for some fun times.

May 11, 2007 | 05:06 PM

#3 (permalink)

mitsu4g63t

Thread Starter

Almost A Civilian

Joined: Sep 2005

Posts: 308

Likes: 0

The pipe doesnt adjust, it's a 90 degree angle that's mounted the hot side of the ic and goes back toward the engine.

__________________

May 12, 2007 | 12:34 PM

#4 (permalink)

mitsu4g63t

Thread Starter

Almost A Civilian

Joined: Sep 2005

Posts: 308

Likes: 0

it doesn't work anyway. the damn tranny dipstick won't let the pipe go from the tb elbow to the ic. I give up. this is my second fmic and still nothing.

__________________

May 12, 2007 | 12:44 PM

#5 (permalink)

BOX SENTRA

OG MUDBONE 240sx

Joined: Feb 2005

Posts: 7,436

Likes: 0

just bring it to someone if you really do give up.

__________________

-Dane

98 240 w/ bolt-ons
Srqspeed.com

May 12, 2007 | 02:14 PM

#6 (permalink)

So_Sli

Banned

Joined: Apr 2005

Posts: 1,107

Likes: 0

What intercooler kit is this, and where did you buy it?

May 12, 2007 | 03:25 PM

#7 (permalink)

BOX SENTRA

OG MUDBONE 240sx

Joined: Feb 2005

Posts: 7,436

Likes: 0

just get a different pipe for the hotside and reroute the piping a bit. you can get 2 1/4'' mandrel bent stainless piping pretty cheap

__________________

-Dane

98 240 w/ bolt-ons
Srqspeed.com

May 14, 2007 | 11:08 PM

#8 (permalink)

50TRIM

Registered User

Joined: Aug 2005

Posts: 67

Likes: 0

I would not worry too much about it, you can use a wide variety of heat transfer units. Some are as simple as the Harley Davidson oil cooler units. Just make sure the tranny fluid is cooled sufficiently with what ever means fits your setup meaning you may need more cooling on a boosted or sprayed vehicle. Air or liquid cooled should work fine. If you are having trouble finding a place to mount it (fit), use something else. i.e From a different vehicle from the junk yard with a tranny cooler.

__________________

www.gearracing.com

Last edited by 50TRIM; May 14, 2007 at 11:11 PM.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last