Almost done
Thread Starter
Awd the enemy of fwd
Joined: Jul 2004
Posts: 1,323
Likes: 0
Almost done
Update on motor
Just put on the evo 9 mr tb
Working on Downpipe now. This is just a mock up pipe
Still have get it to 90 back aroud.
And here is the aeromotive fpr.
Just put on the evo 9 mr tb
Working on Downpipe now. This is just a mock up pipe
Still have get it to 90 back aroud.
And here is the aeromotive fpr.
__________________
2 Step @ 1.5 bars..... Who wants some
And I thought that AWD is to have traction.
2 Step @ 1.5 bars..... Who wants some
And I thought that AWD is to have traction.
Last edited by boosteddsm; Apr 23, 2007 at 10:39 AM.
Thread Starter
Awd the enemy of fwd
Joined: Jul 2004
Posts: 1,323
Likes: 0
I did, but I pulled it cuz I over heated it. Well a friend overheated. Long story short. It started knocking thought I spun a rod bearing pulled motor, fidanza flywheel bolts came loose.
Now I put 272 280 cams in and putting 35r on, since the motor is out. Alot easier to do with it out.
Now I put 272 280 cams in and putting 35r on, since the motor is out. Alot easier to do with it out.
__________________
2 Step @ 1.5 bars..... Who wants some
And I thought that AWD is to have traction.
2 Step @ 1.5 bars..... Who wants some
And I thought that AWD is to have traction.
Thread Starter
Awd the enemy of fwd
Joined: Jul 2004
Posts: 1,323
Likes: 0
The rear main from where the flywheel came loose was a little ruff, took it to a machine shop they said it wasnt that bad. The cut the mains .001. He said that the nitrating was still there though. That the nitrating was fairly deep.
__________________
2 Step @ 1.5 bars..... Who wants some
And I thought that AWD is to have traction.
2 Step @ 1.5 bars..... Who wants some
And I thought that AWD is to have traction.
Thread Starter
Awd the enemy of fwd
Joined: Jul 2004
Posts: 1,323
Likes: 0
