Gasket Question
best place to get a head gasket, valve cover gasket, intake mani gasket, and exhuast mani gasket? also what head gasket would i use when im putting a 93 7bolt head on a 6bolt block?
__________________
DSM Part Out
DSM Part Out
i got all the parts i ever needed here and they shipped over night, http://www.diamondstarmotorsport.com/engineparts.shtml
felpro is the best depends on how huch boost you are running
the most i will run is 20psi. im running a b16g on a 6 bolt with 2g pistons. would a stock one from mitsu work ok?
__________________
DSM Part Out
DSM Part Out
stephan, a stock one will work perfectly fine. my GSX was pushing 23-25 PSI on a stock motor, never torn open on a 50 trim. you will be OK.
__________________


Kevin *Slo Si* 9/13/06 RIP! You will be missed! Godspeed!

We will miss you Pablo. Take care man. 1!


Kevin *Slo Si* 9/13/06 RIP! You will be missed! Godspeed!

We will miss you Pablo. Take care man. 1!
Originally Posted by BROTHERS
felpro is the best depends on how huch boost you are running
__________________
Quote : I'm Slow:
Less hours = less $$. Less repetitive 'ish every day = PRICELESS!
Quote : I'm Slow:
Less hours = less $$. Less repetitive 'ish every day = PRICELESS!
I prefer factory gaskets.
The best prices you will find is from Josh at http://www.jnztuning.com/
The best prices you will find is from Josh at http://www.jnztuning.com/
__________________
Tom
Tom
well i got a stock one from mitsu....it was like $50 and some change
__________________
DSM Part Out
DSM Part Out



