alright on my exhaust housing right around the flapper hole for the wastegate there is three cracks that go to the other side, am i gonna boost leak or whats the deal.
also i need a actuator.

 

You need a new turbine housing. OR get that welded (ghetto). You will have trouble holding boost with those cracks if they are outside the flapper area.

 

yeah thats what i was thinking,the way i say these cracks it wont hold boost on its own.i am bringing the housing to this shop in brooksville that welds cast and i will have them grind the cracks down and fill them in with weld and grind it flush.

sounds good....