profec b
Thread Starter
rice sleeper
Joined: Mar 2001
Posts: 1,017
Likes: 0
ok enough about what ebc is better and what u have, back to topic, anyone wanna help here?
Omnipotence
Joined: Mar 2004
Posts: 8,843
Likes: 0
Originally Posted by dsm
ok enough about what ebc is better and what u have, back to topic, anyone wanna help here?
Thread Starter
rice sleeper
Joined: Mar 2001
Posts: 1,017
Likes: 0
havent tried hooking up both lines, will try it today. tial 44mm with 14 or 15psi spring, dont remember
Awd the enemy of fwd
Joined: Jul 2004
Posts: 1,323
Likes: 0
do you have the insrtuction manual for the proec b
from the com side of the boost valve unit you run the hose to the top of the wastegate. and the nc side runs to a pressure source, same as the bottom nipple of the wastegate runs to a pressure source.
from the com side of the boost valve unit you run the hose to the top of the wastegate. and the nc side runs to a pressure source, same as the bottom nipple of the wastegate runs to a pressure source.
__________________
2 Step @ 1.5 bars..... Who wants some
And I thought that AWD is to have traction.
2 Step @ 1.5 bars..... Who wants some
And I thought that AWD is to have traction.
Awd the enemy of fwd
Joined: Jul 2004
Posts: 1,323
Likes: 0
you could even run the nc hose off the valve with and t it into the bottom hose off the wastegate. Do you have a nipple on your turbo, if not run a couple of t so you can get positive pressure to both of those sources and you should be all right.
__________________
2 Step @ 1.5 bars..... Who wants some
And I thought that AWD is to have traction.
2 Step @ 1.5 bars..... Who wants some
And I thought that AWD is to have traction.
