Profec-b Boost Controller Problems...help!
Thread Starter
F*ck da rent, get the Lex
Joined: Feb 2003
Posts: 820
Likes: 0
Profec-b Boost Controller Problems...help!
I JUST GOTTA 97 GS-T AND I DON'T BELIEVE THAT THE PROFEC-B IS HOOKED UP CORRECTLY. THE BOOST GAUGE WORKS FINE, BUT I'M NOT SURE WHERE THE VACUUM TUBES SHOULD GO. I FOUND A BUNCH OF HOSES JUST HANGING AROUND. I WAS WONDERING IF SOMEONE COULD DO A WALKTHROUGH OF WHERE WHICH HOSES SHOULD CONNECT TO WHICH NIPPLES. I NEED TO HOOK UP THE PROFEC-B, T3/T04, AND A DELTAGATE WASTEGATE. THE WASTEGATE HAS TWO NIPPLES. I KNOW I SOUND LIKE AN AMATEUR, BUT THIS IS MY FIRST TURBO CAR. THANKS FOR THE HELP.
You Can't Moderate Me.
Joined: Feb 2004
Posts: 12,541
Likes: 0
i got the profec b spec II,it's a good ebc if ya can figure it out....goodluck...i'd say something but dont know how DSM's work...sorry bro
__________________
R.I.P Pablo "Fathead" Garcia & Kevin "Slo_Si" Gonzalez Forever in our hearts.
R.I.P Pablo "Fathead" Garcia & Kevin "Slo_Si" Gonzalez Forever in our hearts.
13.04@104mph
Joined: Nov 2001
Posts: 1,829
Likes: 0
i yanked the whole bcs stuff
nipple on the comp housing connects to the IN on the profec solenoid.
nipple on the wastegate connects to the OUT of the profec solenoid
and just plug the intake nipples if u removed the vac lines
its quite simple
nipple on the comp housing connects to the IN on the profec solenoid.
nipple on the wastegate connects to the OUT of the profec solenoid
and just plug the intake nipples if u removed the vac lines
its quite simple
