mtx thunder 152 amp
2ch amp
Specifications:
-RMS Power measured at 12.5 Volts DC
37.5 Watts x 2 into a 4 ohm load with less than 0.05%Thd+N
75 Watts x 2 into a 2 ohm load with less than 0.1% Thd+N
150 Watts bridged into a 4 ohm load with less than 0.1% Thd+N
Dynamic Power (IHF-202 Standard) measured at 14.4 Volts DC
90 Watts x 2 into a 4 ohm load
165 Watts x 2 into a 2 ohm load
325 Watts bridged into a 4 ohm load
Signal to Noise Ratio:>110dB A-Weighted
Damping Factor:>200
Frequency Response: 20Hz-20kHz +/- 0.25%dB
Maximum Input 8Vrms
Thunder EQ: Variable Bass Boost (0-18dB) centered at 40Hz
Crossover: Variable 40Hz to 200Hz, 12dB/octave high pass, 24dB/octave low pass with mono output
Dimensions: 8"x9"x2"
40$obo
Specifications:
-RMS Power measured at 12.5 Volts DC
37.5 Watts x 2 into a 4 ohm load with less than 0.05%Thd+N
75 Watts x 2 into a 2 ohm load with less than 0.1% Thd+N
150 Watts bridged into a 4 ohm load with less than 0.1% Thd+N
Dynamic Power (IHF-202 Standard) measured at 14.4 Volts DC
90 Watts x 2 into a 4 ohm load
165 Watts x 2 into a 2 ohm load
325 Watts bridged into a 4 ohm load
Signal to Noise Ratio:>110dB A-Weighted
Damping Factor:>200
Frequency Response: 20Hz-20kHz +/- 0.25%dB
Maximum Input 8Vrms
Thunder EQ: Variable Bass Boost (0-18dB) centered at 40Hz
Crossover: Variable 40Hz to 200Hz, 12dB/octave high pass, 24dB/octave low pass with mono output
Dimensions: 8"x9"x2"
40$obo
__________________
BImmer sold
Integra SOLD
http://hitemptech.com/ - HiTemp Technology Corporation – Specialists in high temperature (hi-temp) technology, non-burning technology, fume incineration and custom processing furnaces.
BImmer sold
Integra SOLD
http://hitemptech.com/ - HiTemp Technology Corporation – Specialists in high temperature (hi-temp) technology, non-burning technology, fume incineration and custom processing furnaces.


