2 JL W6 v2's and JL 1000 Watt Amp all brand New in boxes
Wish you could be me ?
Thread Starter
Join Date: Mar 2003
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
2 JL W6 v2's and JL 1000 Watt Amp all brand New in boxes
I have 2 brand new still in the box JL W6 V2's and the JL 1000 Watt amp also brand new in the box. I am asking400 a piece for the subs and 825 for the amp.
Info on Subs
Nominal Diameter: 12 inches (300 mm)
Continuous Power Handling: 400 Watts
Voice Coil: 2.75" diameter, 4-layer, Kapton former
Available Configurations: Dual 4 ohm only
Xmax (one-way, linear): 0.65" (16.5 mm)
Sealed Enclosure Range: 0.90-1.50 cu.ft. (25.0-42.0 liters)
Ported Enclosure Range: 1.25-1.75 cu.ft. (35.4-49.5 liters)
VRCâ„¢ Technology: YES
W-Coneâ„¢ Technology: YES
Elevated Frame Technology: YES
Floating Cone Attach Technology: YES
NeckVentâ„¢ Technology: YES
Info on amp
Specifications:
Rated Power:
1000 W RMS @ 1.5 ohm-4 ohm
(11V-14.5V)
THD at Rated Power:
<0.05% @ 4 ohm
S/N Ratio*:
>95dB below rated power
Frequency Response:
5 Hz-500 Hz (+0, -1dB)
Damping Factor:
>500 @ 4 ohm/50 Hz
Input Range:
switchable from 200mV-2V RMS
to 800mV-8V RMS
Dimensions:
19.7"L x 9.25"W x 2.36"H
(500 mm x 235 mm x 60 mm)
Features:
Differential-Balanced Input Topology:
(1 pair of inputs)
On-board Crossover:
fully-variable (40-200 Hz),
selectable-slope LP (12 or 24 dB per octave)
Preamp Output:
2-channel (independent active filter, parallel with amp filter or full-range)
Bass EQ:
parametric with variable boost up to 15dB and Remote Bass Control (optional)
Infrasonic Filter:
fully-variable 24dB/octave from 15-60 Hz
Output Polarity Reversal:
switch permits instant output polarity reversal
Dual mono speaker output connections:
accept up to 8ga. wire
+12V and Ground connections:
accept 4ga. wire (required)
Also 100 dollars off if you buy all of it together. You can email me at bigballaboi61@aol.com or call me at 813-924-4588 ask for Ray
Info on Subs
Nominal Diameter: 12 inches (300 mm)
Continuous Power Handling: 400 Watts
Voice Coil: 2.75" diameter, 4-layer, Kapton former
Available Configurations: Dual 4 ohm only
Xmax (one-way, linear): 0.65" (16.5 mm)
Sealed Enclosure Range: 0.90-1.50 cu.ft. (25.0-42.0 liters)
Ported Enclosure Range: 1.25-1.75 cu.ft. (35.4-49.5 liters)
VRCâ„¢ Technology: YES
W-Coneâ„¢ Technology: YES
Elevated Frame Technology: YES
Floating Cone Attach Technology: YES
NeckVentâ„¢ Technology: YES
Info on amp
Specifications:
Rated Power:
1000 W RMS @ 1.5 ohm-4 ohm
(11V-14.5V)
THD at Rated Power:
<0.05% @ 4 ohm
S/N Ratio*:
>95dB below rated power
Frequency Response:
5 Hz-500 Hz (+0, -1dB)
Damping Factor:
>500 @ 4 ohm/50 Hz
Input Range:
switchable from 200mV-2V RMS
to 800mV-8V RMS
Dimensions:
19.7"L x 9.25"W x 2.36"H
(500 mm x 235 mm x 60 mm)
Features:
Differential-Balanced Input Topology:
(1 pair of inputs)
On-board Crossover:
fully-variable (40-200 Hz),
selectable-slope LP (12 or 24 dB per octave)
Preamp Output:
2-channel (independent active filter, parallel with amp filter or full-range)
Bass EQ:
parametric with variable boost up to 15dB and Remote Bass Control (optional)
Infrasonic Filter:
fully-variable 24dB/octave from 15-60 Hz
Output Polarity Reversal:
switch permits instant output polarity reversal
Dual mono speaker output connections:
accept up to 8ga. wire
+12V and Ground connections:
accept 4ga. wire (required)
Also 100 dollars off if you buy all of it together. You can email me at bigballaboi61@aol.com or call me at 813-924-4588 ask for Ray
Last edited by StreetDreamzRX-7; 10-26-2004 at 10:19 AM.