Right now Im changing my timing belt and water pump on my 1991 integra. And for some reason ( and believe me, my mechanic and I tryed to get it off for an hour and a half today ) the crankshaft pulley bolt will not come loose. We've tried a 1/2 breaker bar and a 1/2 impact gun at 120 ft/lb of torque. So if any has a bigger compressor or 3/4 impact gun or knows a way to get that bolt of this is an oppurtunity to amek a quick 30 to take off one bolt. I live in the St pete area and would like this done asap. So let me knoe if you interested. Thanks

David

 

I have a wrench that is supposed to get the crank pulley off any honda/acura with no problem. I have never used it, it cost about $75 from snap-on tools. I'll sell you that for $40. lmk

 

btw it works for all h/a 55mm pulleys.

 

120ft/lb torque dang that's probably twice the torque your car has ever seen jfwy

you're in the wrong forum post it under jobs I'm sure someone that needs $ will do it