Mazda Tech If your Mazda is a brap brap,or a zoom zoom, then this is your place.

mx6 clutch/tranny help

Thread Tools
 
Old May 19, 2009 | 12:06 PM
  #1 (permalink)  
markstheman365's Avatar
Thread Starter
cant slide
 
Joined: May 2008
Posts: 2,441
Likes: 0
Default mx6 clutch/tranny help

my clutch seems to be going bad, but thats not all. also it seems as if the clutch isnt fully disengaging. ill be driving then let go of the gas and press the clutch in and it sounds like i dont have the cluthch down (downshift). also if i idle in first with the clutch down it revs up and down and almost stalls out, then after a minute or 2 it just dies on me. also the car battery seems to be drainging when i do this.
plz call me at 813 679 1441 with any help thx
__________________
contact admin@tamparacing.com to advertise on here.. - mod
Reply
Old Jun 2, 2009 | 06:30 AM
  #2 (permalink)  
somestone's Avatar
Registered User
 
Joined: Feb 2009
Posts: 72
Likes: 0
Default

PRESSURE PLATE ISSUE...

YOU NEED TO SWAP NEW CLUTCH HAPPYMEAL (CLUTCH, PLATE, THRUST BEARING ETC)
CHECK FOR A VACUUM LEAK..... (if i idle in first with the clutch down it revs up and down and almost stalls out)

OR YOU MIGHT WANNA START BY CHECKING YOUR HYDRAULICS.. MASTER & SLAVE CYLINDERS (about 30.00 to rebuild) - its the cheapest answer....

OTHER THAN THAT YOU NEED TO TAKE TRANNY DOWN AND LOOK AROUND....

AND LAST BUT NOT LEAST - I WOULD GET THAT BATTERY CHECKED..... MOST ADVANCE AUTO PARTS WILL DO IT FOR FREE......
Reply




All times are GMT -8. The time now is 12:55 PM.