I had just bought a 89 motor out of the junk yard and was installing it when i came about a problem of finding the connection for the power steering pump.
I cant find any resources to tell me what i need or how to connect the power steering. This car is a automatic and if you can give me any advice or show me some pics of how it is connected i would be very greatful. Thank you.

 

You should post up what type of car.

 

it is a 1989 mazda rx7 automatic non turbo.

 

On an s4 the connection for the powersteering plug is on the engine harness (the one with battery terminals attached to it) and the plug should be right near the fuse box in the engine compartment (at least on an s4 it is) some people think an engine harness is what attaches to the actual engine but the correct term for that is the "emissions harness"

Iluvmyrx7.com

it is a site with FULL Factory manuals for all rx7s including yours. It is in PDF format so you can download it. Hope that helps some.

-Tony

 

What is a s4?? and its not on the engine harness the connectors are different, the 89 is the one with the new style intake like the 1990. Plus my power steering carries two connectors. I also checked the service manual and that didnt give me any information.