I cant get the AN fittings on the SS braided hose, any ideas?

 

yeah you jabroni, put a hose clamp near the end of the hose and tighten t down to compress the stainless braides to allow the nut to slide onto the hose. get some light weight oil on the hose end so it slides into the rubber hose easily. push the hose end in As far as it will go and then thread the hose end into the nut. do Not hold the hose end still and thread the nut onto the hose end... hold the hose/nut still and thread the hose end into it. works like a charm. ill try to stop by tomm, or gimme a call when you guys are gonna start messing w/ it.

chris