FC question
Thread Starter
Say NO to Rotor Knock!!!
Joined: Nov 2003
Posts: 61
Likes: 0
FC question
well after a pusaltion dampner fire in my s4 i finally managed to have the cars wiring and ecu done and the car runs and yes i did get that pusaltion dampner issue dealt with...but what I would like to know is if does anyone out there either have an issue with aftermarket steering wheels on the s4 or if theres some type of issue that after the car has been turned and idles for about 15 secs and it did exist before the fire there seems to be some type of beeping sound and it isnt the one from the oil or the coolant but just some other type of annoying beeping sound...let me know what yall can come up with
Trunks are for corpses.
Joined: Nov 2004
Posts: 978
Likes: 0
The power steering computer beeps too. Different beeps mean different shit is wrong, Not sure what they all mean.
__________________
1986 Mazda RX7 GXL - "Champagne"
134.7 RWHP - Going slow in style
1986 Mazda RX7 GXL - "Champagne"
134.7 RWHP - Going slow in style
whats good?
Joined: Feb 2004
Posts: 170
Likes: 0
yeah could be the power steering if you have the variable resistance power steering system. i know from experience that it also has an annoying loud beep sound when it is not working properly. you can disconnect it or bypass it and the beeping will go away, but then your power steering will be on one setting which is somewhere in the middle, but its not that bad. or you can further investigate the problem and fix it the right way.
Thread Starter
Say NO to Rotor Knock!!!
Joined: Nov 2003
Posts: 61
Likes: 0
Well in any case the fucking herb who had the car before me totally fucked up the steering column he fucked up the horn and the car doesnt have a turn signal canceller cam in any case thanks for the feed back and if you all happen to know where i could find a turn signal canceller cam?
Get Down-Or-Stay Down
Joined: Jun 2002
Posts: 13,363
Likes: 0
Originally Posted by rotorjho7
Well in any case the fucking herb who had the car before me totally fucked up the steering column he fucked up the horn and the car doesnt have a turn signal canceller cam in any case thanks for the feed back and if you all happen to know where i could find a turn signal canceller cam?
I dont think its just a "cam" you have to change the whole combination switch
Jimmy Korea
Joined: Sep 2004
Posts: 1,074
Likes: 0
yeah theres a sensor that doesnt respond well to the ps steering system for the rx7's. When the steering wheel is changed and it misaligned it will cause the sensor to go crazy like and send off a beep. id say bypass it. not that big of a deal to me. Also the soldering points for the cpu is prob bad on your car. This is becuase of old age and shitty solder points. id suggest going to the rx7club.com and doing a search for cpu fixes.
This is the most common cause of the horns not working, that or the tard who sold you the car probably didnt bother hooking it back up. time to rip it apart
This is the most common cause of the horns not working, that or the tard who sold you the car probably didnt bother hooking it back up. time to rip it apart
Thread
Thread Starter
Forum
Replies
Last Post
