Avg age of TR chit talkers!
What up! Iam really tired of the trash talking with no point! I enjoy to the fullest trash talking with a point! Any ways the point of this post is to get a little better picture of who is talking the talk and who is walking the walk!
Iam damn near 30 and have some expereince with rotories. I have rebuilt a street ported a 13b 4 port, torn apart a few and have had two different Rx-7's a 83 and 85 both daily drivers. I am the performance on no budget type of person! CHEAP IS GOOD!
Tell Mazda tech forum about you! Lets find out who is the old man, HA, Ha, ha ! ! !
Iam damn near 30 and have some expereince with rotories. I have rebuilt a street ported a 13b 4 port, torn apart a few and have had two different Rx-7's a 83 and 85 both daily drivers. I am the performance on no budget type of person! CHEAP IS GOOD!
Tell Mazda tech forum about you! Lets find out who is the old man, HA, Ha, ha ! ! !
well, i am 16 i own a probe but as most of you should know they came with the mazda f2 and f2t and i have not talked any talk and i dont like people who are all bs. and i am trying to become more mechanically compitent. is that good enough?
__________________


Guest
Posts: n/a
I'm 20... i do all the work on my car OTHER than building the motor itself... just never built a rotary and didnt want to learn on my 3rd gen... but this is my second rotary... first was a `91 FC GXL 2+2 and now i have a `93 FD R1... and i have been building cars in general for about 5 years... i have a few fast dailys under my belt...
-Keith
-Keith
I'm 23 I have owned 5 2nd gen RX7's the current one will be the last one (hopefully) I have done everything to all of my my RX7's except internal modifications but I will be helping out with my TurboII when I decide what motor i'm running. Besides that I haev been working on cars at the shop or at home for about 6 yrs now. Had to leave the shop. but I know somehow i'll end up in the import industry.
I am 29 years old, almost 30 this year. Veteran " Recon /Sniper" Married, I have 2 sons. I currently have 4 cars that run, I also have a rotary single rotor motorcycle, which is pretty cool.
I have a somewhat large shop in the back of my house, it currently holds about 4 cars that have been torn down.
I have built 2 J spec turbos,
I have worked almost all RX7s here on this side of the bay since 1995
I have a 1 of 1000 made GLH-S Shelby Charger 0867, whihc I have worked on for over 7 years. Its right around 380 hp @ 34 psi.
I help Luis with his new rail; every moment I have goes to that new car. I often go to the track and tune the car while he runs it
I have a somewhat large shop in the back of my house, it currently holds about 4 cars that have been torn down.
I have built 2 J spec turbos,
I have worked almost all RX7s here on this side of the bay since 1995
I have a 1 of 1000 made GLH-S Shelby Charger 0867, whihc I have worked on for over 7 years. Its right around 380 hp @ 34 psi.
I help Luis with his new rail; every moment I have goes to that new car. I often go to the track and tune the car while he runs it
__________________
custom parts is our perfection.
custom parts is our perfection.
Originally posted by 813kr$
Any ways the point of this post is to get a little better picture of who is talking the talk and who is walking the walk!
Any ways the point of this post is to get a little better picture of who is talking the talk and who is walking the walk!
I have owned 4 RX7s.. 79,84,87,8810 AE.. and been around rotarys since my JR high days..
I work on my own shit.. and yeah I tend to lean towards the first gens more.. and would like to see more at the tracks and streets
im 22, bitches, i own a 13 second automatic acura
and yes, i own a 6 port that can go 12 sec. in a quarter mile
andy my vagina is itchy....
and yes, i own a 6 port that can go 12 sec. in a quarter mile
andy my vagina is itchy....




