K20 with LHT400 Turbo -Step by Step
Thread Starter
John @ LHT Performance
Joined: Sep 2003
Posts: 2,120
Likes: 0
Thanks Taylor.
Well below is a shot of the piping installed for the last time, The over flow tank has a custom bracket to postion it in the right spot and looks very clean.
The thottle cable bracket is modified and a GSR thottle cable is used.
All the Misc wiring has to be cleaned up and secured. There is still little things left to do, but it's starting to come together.
Well below is a shot of the piping installed for the last time, The over flow tank has a custom bracket to postion it in the right spot and looks very clean.
The thottle cable bracket is modified and a GSR thottle cable is used.
All the Misc wiring has to be cleaned up and secured. There is still little things left to do, but it's starting to come together.
__________________
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
Thread Starter
John @ LHT Performance
Joined: Sep 2003
Posts: 2,120
Likes: 0
OK, The vehicle is pretty much ready to go.
After a few little problems , IAC valve stuck open at 2200 rpms . We found out this happens on the k series, It's warrantied from our Engine supplyer so no worries.
We built a catch can and a breather can seen in the pics. We also cleaned up some of the wiring and hoses which will show on the before and after pics.
To finish of the whole package we supplied the customer with a JDM valve cover and spark plug cover. This is at no charge to the customer , we feel this was the only thing missing to make this look at it's best.We take great pride in our work and love what we do, I hope it shows in the finished product.
The dyno will be up next week.
Thanks for looking everyone.
This the catch can routed between the block vent and the intake manifold
This is the valve cover breather.
The day it came ( Before)
After:
K20 LHT Turbo ,Auto to manual with some magic LHT Touch.
After a few little problems , IAC valve stuck open at 2200 rpms . We found out this happens on the k series, It's warrantied from our Engine supplyer so no worries.
We built a catch can and a breather can seen in the pics. We also cleaned up some of the wiring and hoses which will show on the before and after pics.
To finish of the whole package we supplied the customer with a JDM valve cover and spark plug cover. This is at no charge to the customer , we feel this was the only thing missing to make this look at it's best.We take great pride in our work and love what we do, I hope it shows in the finished product.
The dyno will be up next week.
Thanks for looking everyone.
This the catch can routed between the block vent and the intake manifold
This is the valve cover breather.
The day it came ( Before)
After:
K20 LHT Turbo ,Auto to manual with some magic LHT Touch.
__________________
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
Registered User
Joined: Jan 2002
Posts: 1,516
Likes: 0
that is some good stuff right there. well done!
__________________
09 Pontiac G8 GT
08 S2000 CR (sold)
06 Sti (sold)
98 ITR (sold)
88 civic 4 door (sold)
95 Mustang GT (sold)
87 LX 5.0 stang (sold)
LHTPerformance.net
09 Pontiac G8 GT
08 S2000 CR (sold)
06 Sti (sold)
98 ITR (sold)
88 civic 4 door (sold)
95 Mustang GT (sold)
87 LX 5.0 stang (sold)
LHTPerformance.net
Retired Ricer...
Joined: Jan 2003
Posts: 11,813
Likes: 0
looks like shit!!!! you guys should just close up shop....
jfwy... looks awesome!!! great work guys!!!
jfwy... looks awesome!!! great work guys!!!
__________________
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
Registered User
Joined: Jul 2002
Posts: 9,270
Likes: 0
I wouldnt expect anything less from you all
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
HONDAMIKE.COM
Joined: Jan 2004
Posts: 3,942
Likes: 0
you guys ROCK
__________________
"THE REAL HONDAMIKE" ASE Master Technician
"Imitation is the highest form of flattery", but clones can get it wrong because we are promoting individuality and being proud of yourself.
"THE REAL HONDAMIKE" ASE Master Technician
"Imitation is the highest form of flattery", but clones can get it wrong because we are promoting individuality and being proud of yourself.
Registered User
Joined: Mar 2006
Posts: 427
Likes: 0
Wow The Swap Came Out Nice!!! Hey John You Guys Did A B20 Turbo On My Boy Little Mike's Red Crx But Now He Has A Green One. Well We Both Work At Autoway Honda. I Want To Turbo My 94 Si. Can U Pm Me When Ur On So We Can Talk About Working On My Car?
