B-Spec Project Eg Teaser
B-Spec Project Eg Teaser
__________________
Just another guy with a laptop addicted to forced induction.
JoKie Tuning
Ray's
Performance
Machine
813-368-8006
B-Spec Tuning
813-451-7547
Just another guy with a laptop addicted to forced induction.
JoKie Tuning
Ray's
Performance
Machine
813-368-8006
B-Spec Tuning
813-451-7547
__________________
PUREBRED PERFORMANCE
Fabrication & Tuning Services
813-451-7547 or 813-712-0202
Www.PPETUNED.com <~~ WEBSITE
Curious on honda/acura Ecu Chipping and dyno tuning? Call or visit the website above. Hondata/Neptune/Ectune/Crome Pro. Tuning available for most other systems and platforms as well. DYNOJET
PUREBRED PERFORMANCE
Fabrication & Tuning Services
813-451-7547 or 813-712-0202
Www.PPETUNED.com <~~ WEBSITE
Curious on honda/acura Ecu Chipping and dyno tuning? Call or visit the website above. Hondata/Neptune/Ectune/Crome Pro. Tuning available for most other systems and platforms as well. DYNOJET
off to bed... just finished wiring the new fuel system... got pan tapped and everything is coming along nicely
__________________
Just another guy with a laptop addicted to forced induction.
JoKie Tuning
Ray's
Performance
Machine
813-368-8006
B-Spec Tuning
813-451-7547
Just another guy with a laptop addicted to forced induction.
JoKie Tuning
Ray's
Performance
Machine
813-368-8006
B-Spec Tuning
813-451-7547
UPDATE: Got the turbo kit on and running a few days after the last post. Had wastegate problems, so I got a used one from a friend. Turns out it had a 20lb spring in it. Ya, my headstuds didnt like that too much. Stretched them at about 18psi half throttle @ 11.8 AFR.
Exactly what my goal for this car is... To test the stok B Motor and find its weaknesses for myself. I feel that pushing this car to the limit will give me a better understanding of what these motors are capable of @ stock trim.
The car is getting ARP's, new HG, and A fresh valve job from Ray's Performance Machine. Mabye I will be JDM and throw a block guard in there.
Loving the high compression.
@ 6psi it was neck and neck with SilverGhost's SRT4 @ 25psi...
Not bad
Stay tuned
Exactly what my goal for this car is... To test the stok B Motor and find its weaknesses for myself. I feel that pushing this car to the limit will give me a better understanding of what these motors are capable of @ stock trim.
The car is getting ARP's, new HG, and A fresh valve job from Ray's Performance Machine. Mabye I will be JDM and throw a block guard in there.
Loving the high compression.
@ 6psi it was neck and neck with SilverGhost's SRT4 @ 25psi...
Not bad
Stay tuned
__________________
Just another guy with a laptop addicted to forced induction.
JoKie Tuning
Ray's
Performance
Machine
813-368-8006
B-Spec Tuning
813-451-7547
Just another guy with a laptop addicted to forced induction.
JoKie Tuning
Ray's
Performance
Machine
813-368-8006
B-Spec Tuning
813-451-7547
Last edited by B-Spec; 05-04-2010 at 07:03 AM.
p.s. stay tuned alright for lil kimmy's hatchie coming soon
#2 or 3 checks out within 2-3 weeks maybe sooner . Then it'll sound like you have a WRX swap !
__________________
R.I.P. Kevin "Slo-Si" Gonzalez
Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup
Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped
R.I.P. Kevin "Slo-Si" Gonzalez
Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup
Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped