Chucky's Infinity G35 'Project Turbo'
Chucky's Infinity G35 'Project Turbo'
This car was sent down from Brooklyn, New York, For us to do a single turbo upgrade the car was previously superchagerd but the gain were minimal & and was low on the efficiency scale.
We're working with strict time constraints so let's get started!
Some goodies came in!
We're working with strict time constraints so let's get started!
Some goodies came in!
__________________
Hybrid Motorsports LLC.
9470 Ulmerton Rd.
Largo FL. 33773
Unit 3E
Ph. 727.753.9664
Shop Forum: https://www.tamparacing.com/forums/hybrid-motorsports/
Hybrid Motorsports LLC.
9470 Ulmerton Rd.
Largo FL. 33773
Unit 3E
Ph. 727.753.9664
Shop Forum: https://www.tamparacing.com/forums/hybrid-motorsports/
Last edited by bikeimports; 10-30-2010 at 04:58 PM.
Update
Now We have the intercooler mounted we can run our piping, but first ; SOME MORE GOODIE CAME IN!
Garrett gt3582r T3:
The New Precision 46mm wastegate:
Kinetix SSV intake manifold:
Went ahead and did the fuel system:
Walbro 255 lph fuel pump was added:
fuel sending unit was modified & pump added:
New fuel damper line:
Siemen Deka 630cc injectors:
So we began removing the stock manifold:
After all of that, And finally being able to access the injector, out with the old, in with the new.
Then some new plugs while in there , a bit cooler on the heat range or at least hoped for.....
Onto installing the manifold!
Garrett gt3582r T3:
The New Precision 46mm wastegate:
Kinetix SSV intake manifold:
Went ahead and did the fuel system:
Walbro 255 lph fuel pump was added:
fuel sending unit was modified & pump added:
New fuel damper line:
Siemen Deka 630cc injectors:
So we began removing the stock manifold:
After all of that, And finally being able to access the injector, out with the old, in with the new.
Then some new plugs while in there , a bit cooler on the heat range or at least hoped for.....
Onto installing the manifold!
__________________
Hybrid Motorsports LLC.
9470 Ulmerton Rd.
Largo FL. 33773
Unit 3E
Ph. 727.753.9664
Shop Forum: https://www.tamparacing.com/forums/hybrid-motorsports/
Hybrid Motorsports LLC.
9470 Ulmerton Rd.
Largo FL. 33773
Unit 3E
Ph. 727.753.9664
Shop Forum: https://www.tamparacing.com/forums/hybrid-motorsports/
Last edited by Hybrid Motorsports; 10-24-2010 at 06:45 PM.
Single turbo, Turbonetics / custom crossover pipe / custom downpipe.
__________________
Hybrid Motorsports LLC.
9470 Ulmerton Rd.
Largo FL. 33773
Unit 3E
Ph. 727.753.9664
Shop Forum: https://www.tamparacing.com/forums/hybrid-motorsports/
Hybrid Motorsports LLC.
9470 Ulmerton Rd.
Largo FL. 33773
Unit 3E
Ph. 727.753.9664
Shop Forum: https://www.tamparacing.com/forums/hybrid-motorsports/
Identical mani.
Its been months but im pretty sure we used supplied gasket set just a pita. Id just put a very light amount or rtv on both sides for cheap insurance.
Its been months but im pretty sure we used supplied gasket set just a pita. Id just put a very light amount or rtv on both sides for cheap insurance.
Update
Well back to the piping, It's a daunting challenge fitting 3" IC piping in this vehicle it's very tight & nissan used every square inch, so some things will need to be relocated.
__________________
Hybrid Motorsports LLC.
9470 Ulmerton Rd.
Largo FL. 33773
Unit 3E
Ph. 727.753.9664
Shop Forum: https://www.tamparacing.com/forums/hybrid-motorsports/
Hybrid Motorsports LLC.
9470 Ulmerton Rd.
Largo FL. 33773
Unit 3E
Ph. 727.753.9664
Shop Forum: https://www.tamparacing.com/forums/hybrid-motorsports/