For some reason I dont have any pressure from my clutch pedal. It WAS completely empty due to swapping the motor. The tranny was a hydro, going to a hydro and I tightened down the line from the chassis to the tranny. Does the car have to run for a minute to build pressure, or do I have to work the clutch pedal to build pressure or could I just be missing something altogether.

 

You have to "work" the cluth. Its called bleeding the clutch, and thaats why you don't have any "clutch pressure"

 

yea id say bleeding the clutch line would be a good idea after a motor/tranny swap

 

yeah, pump it with your hand a few times, then hold it to the floor, as your friend opens the line, but dont release the pedal this the bleeder is closed, do this about 20 times or until, it is shooting out like a cumshot from a good porno, and has no air in it 2

 

I appreciate the info and I'll give it a shot.

 

Got it fixed..thanks for thte info.