coilover problem (grrrr...)
Thread Starter
It's a wooden pickle.
Joined: May 2002
Posts: 14,528
Likes: 0
coilover problem (grrrr...)
lets see... well, tonight, i jack up my car to raise it up an inch or so, seeing as how it was so low that small bumps translated to physical pain for me, and all seems to be going well. 5 minutes in, i'm done with the left rear wheel. i go jack up the left front side, and on completing that, go to loosen the screw on the perch... only to find that there isn't one (?!). i'm not sure how in the hell that perch managed to stay on the sleeve, but it was almost all the way down at the bottom of it. long story short, i'm at a loss as to what to do. right now i've got one spring about an inch higher than all the rest, not sure how to proceed. does anyone have any spare screws lying around that will fit the ground control type perch? or have any idea what to do here? i cant get the perch to move up or down, seems to be stuck where it is on the sleeve... HELP
__________________
USMC
Joined: Sep 2002
Posts: 10,277
Likes: 0
call ground control, i belive they sell replacement screws. or go to home depot and do it the ghetto way. find a screw there that similar to your other ones.
__________________
TR happily married crew-member #2
___________________
TR happily married crew-member #2
___________________
This is the internet. You're just supposed to talk up whatever you do know as if you're a salesman for it. i.e. I drive a Supra and a Corolla therefore 2JZ is the greatest and so is the 4A and I don't care about anything else because it's all crap since I don't have it. I also have a stack of $20 bills in front of me, therefore 20>50 and 20>100 and 20>1000. $20 bill FTW.
