loewr control arm bushing
Thread Starter
Currently Ballin'
Joined: Mar 2001
Posts: 1,113
Likes: 0
lower control arm bushing
I'm trying to find some lower control arm bushing for a 96 integra I think. Anyone know a good place for them? I can never find a site with good prices that works
Last edited by CXHatchback; Feb 20, 2003 at 11:39 AM.
Sorta Kinda O.G.
Joined: Apr 2001
Posts: 1,654
Likes: 0
I assume you are wanting the polyurethane ones? I was going to get those too...but just decided to go with oem and ordered new ones from honda...there are lots of sites that carry the urethane one...did you try a google search? The hard part is finding a shop or someone to put them in if you arent doing it yourself....
__________________
Thread Starter
Currently Ballin'
Joined: Mar 2001
Posts: 1,113
Likes: 0
Well a friend of mine said he has a press that he used to put his in, so we could use it. I was gonna buy oem, cause I only really need one, but the cost of it was $36. I figure I can pick up a set of poly bushing for less that that so that's where I'm at.
And yeah most of the sites I find on google don't work or don't have prices or whatever. Just want something easy so I can point and click.
And yeah most of the sites I find on google don't work or don't have prices or whatever. Just want something easy so I can point and click.
Sorta Kinda O.G.
Joined: Apr 2001
Posts: 1,654
Likes: 0
http://www.stylinconcepts.com/parts....bcategoryid=68
try them...is your bushing squeaking? all my fronts do...its so annoying...I cant wait to get mine put in
try them...is your bushing squeaking? all my fronts do...its so annoying...I cant wait to get mine put in
__________________
Thread Starter
Currently Ballin'
Joined: Mar 2001
Posts: 1,113
Likes: 0
Well I've got gsr lcas and they need new bushings before i put them on so I can finally put my rear swaybar on. One is completely gone, the others are cracked and dry. And thatnks for that link.
Guest
Posts: n/a
Perhaps this might be an option for you:
http://importnut.net/motormount.htm
I was able to find the Poly-Urethane in the tube at Napa for about $13. Plan to do the two lower front motor mounts and possibly the rear as well as the rear control arm bushings.
http://importnut.net/motormount.htm
I was able to find the Poly-Urethane in the tube at Napa for about $13. Plan to do the two lower front motor mounts and possibly the rear as well as the rear control arm bushings.
