oil pan wont seal!!!!!!!!!!!
i stepped on my weiner!
Thread Starter
Join Date: Oct 2002
Posts: 2,994
Likes: 0
Received 0 Likes
on
0 Posts
oil pan wont seal!!!!!!!!!!!
guys i have taken off my oil pan and used an OEM gasket and hondabond and still have a little trickle of oil running into the bottom of my tranny the thingis i spent mad loot on a clutch and dont want it covered with oil AGAIN. any ideas or solutions are much appreciated
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
i stepped on my weiner!
Thread Starter
Join Date: Oct 2002
Posts: 2,994
Likes: 0
Received 0 Likes
on
0 Posts
i did i even spent the money on "HONDABOND" and i still have a trickle every now and then, i have never seen an oil pan kick my ass but this one sure is
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
sounds like rear main seal. Happened to me before PITA.
__________________
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.
Double check the pan gasket before going out and blaming the rear main seal. Make sure the gasket isn't mushroomed out from overtorqueing it.
Sometimes a the Honda torque specs for pan gaskets can be a little too tight.
Sometimes a the Honda torque specs for pan gaskets can be a little too tight.
There's also 2 more seals to check oilfilter seal behind your oilcooler and you shifter seal where it connects to your tranny....
__________________
ZMRacin...for the people since 1998.
typeZ zionmotoracin@gmail.com
> #zionmoto #s1built #battlegroup3<
drag honda / drift soarer / road race benz
ZMRacin...for the people since 1998.
typeZ zionmotoracin@gmail.com
> #zionmoto #s1built #battlegroup3<
drag honda / drift soarer / road race benz
i stepped on my weiner!
Thread Starter
Join Date: Oct 2002
Posts: 2,994
Likes: 0
Received 0 Likes
on
0 Posts
thanks yall, when i put in the clutch i put in a new main seal cause i wasnt gonna go all the way back in for it, im tired of clutches..........3 clutches 3 weeks.........
finally one that works,
thanx
finally one that works,
thanx
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net