car shaking?
Hatorator
Joined: Jun 2002
Posts: 0
Likes: 0
have your wheels balanced then try again.
__________________
1997 Prelude, H23A1 VTEC
Items for sale:
H22/23 block and all internal parts
4 5th gen Prelude wheels, 16x6.5, 5x114.3mm bolt pattern
More stuff for sale:
https://www.tamparacing.com/forums/showthread.php?s=&postid=472993#post472993
1997 Prelude, H23A1 VTEC
Items for sale:
H22/23 block and all internal parts
4 5th gen Prelude wheels, 16x6.5, 5x114.3mm bolt pattern
More stuff for sale:
https://www.tamparacing.com/forums/showthread.php?s=&postid=472993#post472993
Guest
Posts: n/a
one wheel is bent. have been balenced, twice. if it were my rims then would they not shake consistently? i have no freakin clue what it might be but my tranny, and if its my tranny i will have to buy a new one and sell the old one for parts. i hope its my tranny i really want a b16 or ITR.
B16ACRX
Joined: May 2002
Posts: 0
Likes: 0
Could be sevral things
*Check your tires for balance
*Needs alignment
*Tie rod ends
*Check your tires for balance
*Needs alignment
*Tie rod ends
__________________
WTB:A clean 90-91 civic hatchback. Red or black or white in color. Good exterior. Looking to spend around $2,000.
WTB:A clean 90-91 civic hatchback. Red or black or white in color. Good exterior. Looking to spend around $2,000.
i stepped on my weiner!
Joined: Oct 2002
Posts: 2,994
Likes: 0
is it motor shake or suspension and wheel shake????
it could judt be a motor mount, or a really severe misfire, does the car run like shit or anything
it could judt be a motor mount, or a really severe misfire, does the car run like shit or anything
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
Skittle on crack!
Joined: Mar 2002
Posts: 1,584
Likes: 0
Originally posted by "TegPenis"
one wheel is bent. have been balenced, twice. if it were my rims then would they not shake consistently? i have no freakin clue what it might be but my tranny, and if its my tranny i will have to buy a new one and sell the old one for parts. i hope its my tranny i really want a b16 or ITR.
one wheel is bent. have been balenced, twice. if it were my rims then would they not shake consistently? i have no freakin clue what it might be but my tranny, and if its my tranny i will have to buy a new one and sell the old one for parts. i hope its my tranny i really want a b16 or ITR.
BENT wheel although balanced will cause you some problems....just put it on the rear.
Registered User
Joined: Aug 2002
Posts: 192
Likes: 0
Does the car run good? does it have a good amount of passing power?
I was thinking the TPS could be bad, I have seen them make cars run crappy and shake badly
I was thinking the TPS could be bad, I have seen them make cars run crappy and shake badly
__________________
custom parts is our perfection.
custom parts is our perfection.
Guest
Posts: n/a
heh... he walked past me. So yeah, he's got passing power.
Im having the SAME problem, my tranny is lose in the back bracket though. The WHOLE car shakes under acceleration.
Everyone here has listed everything I would say try. Mounts, suspension, tires.
Im having the SAME problem, my tranny is lose in the back bracket though. The WHOLE car shakes under acceleration.
Everyone here has listed everything I would say try. Mounts, suspension, tires.
