the finished N20 project
Registered User
Thread Starter
Join Date: Jan 2002
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
the finished N20 project
It's a Y8 manifold that going on a d16z6 in a crx. Im gonna run a 50 then get a fuel pump and some dyno time and bump it up to a 75.
Does not race from a roll
Join Date: Jun 2002
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
have that on the car yet? or is it something thats in the works? i did something similar on my WRX, when you get that togather i'd like to check it out...
__________________
www.coastaldyno.com
Smackin down LS1s since 99', LQ4s too...
www.coastaldyno.com
Smackin down LS1s since 99', LQ4s too...
Registered User
Thread Starter
Join Date: Jan 2002
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the complements! It's something that I'm in the middle of doing now. I have to say thats it's been the biggest pain in my ass, because on the nx kit you have to flare both ends of the tubing, the flaring tool I bought is a peice of shit because the tubing just slides down through the clamp, so I have to drill out the end of the tubing to make it a little thinner so it will actually flare and then bending the tube is like trying to bend a 6 inch peice of rebard even with the pipe bender. All in all It's coming along, I will post pics as soon as im finished.
