Who has experience with any companies that offer boring oem throttle bodies?? i know a lot of companies do it like King, RC, Big Bore etc. whos the best/cheapest (I know it's an oxymoron, but you know what i mean....)

 

|2C d035 4|\| 3><c3ll3|\|7 j0b. 1 h4v3 4|\| 43M 7h|2077l3 b0dy f|20m \^/4y \^/4y \^/4y b4ck 7h47 k1ck5 455, 7h0ugh 7h47 d035|\|'7 h3lp y0u much. Ju57 |23m3mb3|2 7h47 y0u d0|\|'7 |234lly |\|33d 4|\|y7h1|\|g m0|23 7h4|\| 4 64mm 7B, \^/h1ch 15 2mm b1gg3|2 7h4|\| 7h3 120hp/l173|2 52000.

 

what about a JG 65mm that they recomend with the victor x manifold?

 

That's what I have... it's a piece of SHIT!

 

|\|07 |234lly 1mp|23553d \^/17h 17 7hu5 f4|2

 

the manifold or the TB? or both?

 

The TB.. i have a Skunk mani and it matches perfectly to the JG TB... But, the throttle body sticks. Even after i solved that problem, vacuum pressure under almost-closed throttle keeps the throttle plate open a crack and causes the car to idle at 1600 rpm's... I have spent hours trying to tune the thing in right but gave up and put the stock GSR unit back on.... Plus, the only way you can get the throttle body is with a throttle pulley for a GSR, so you must change it out with one that pulls from the drivers side.. and that is another problem itself..