ok i was changing pads on the hatch today and found out that the seals were bad around the pistons in the cailpers both front sides. I replaced the seals and had to bleed the front two brakes right? Iam still not getting the pressure that i want or thats supposed to be there. I might have let air get into the brake master cynlinder so do i need to bleed all four now? I know there is a certin order from left to right or left passenger side to front driver side or does this matter? please help.

 

Did you replace just the boot or the seal as well?

Teg - LF,RF,RR,RL
Civ - RR,LF,LR,RF

 

i replaced the seals around the pistons thats it . I have very little brake pressure and also i let the fulid in the master brake cynlinder go very low maybe enough to let air in the sys. Do you know if i have to bleed all 4 now.